氧化铝陶瓷表面微波烧结钴基合金功能涂层的研究

谢丰豪; 王文焱; 王爱华; 吴宇; 谢敬佩

doi:10.15980/j.tzzz.2014.05.002

复合材料 | 浏览量 : 0 下载量: 131 CSCD: 2

导出
分享
收藏
专辑

氧化铝陶瓷表面微波烧结钴基合金功能涂层的研究
Preparation of Cobalt-Based Alloy Functional Coating on Alumina Ceramic by Microwave Sintering
2014年34卷第5期页码：525-528
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.05.002

扫描看全文

[1]谢丰豪,王文焱,王爱华,吴宇,谢敬佩.氧化铝陶瓷表面微波烧结钴基合金功能涂层的研究[J].特种铸造及有色合金,2014,34(05):525-528.

Xie Fenghao, Wang Wenyan, Wang Aihua, et al. Preparation of Cobalt-Based Alloy Functional Coating on Alumina Ceramic by Microwave Sintering[J]. Special Casting & Nonferrous Alloys, 2014,34(5):525-528.
[1]谢丰豪,王文焱,王爱华,吴宇,谢敬佩.氧化铝陶瓷表面微波烧结钴基合金功能涂层的研究[J].特种铸造及有色合金,2014,34(05):525-528. DOI： 10.15980/j.tzzz.2014.05.002.

Xie Fenghao, Wang Wenyan, Wang Aihua, et al. Preparation of Cobalt-Based Alloy Functional Coating on Alumina Ceramic by Microwave Sintering[J]. Special Casting & Nonferrous Alloys, 2014,34(5):525-528. DOI： 10.15980/j.tzzz.2014.05.002.

摘要

以钴基自熔性合金粉末和氧化铝陶瓷粉为原料

通过微波烧结在氧化铝陶瓷表面制备梯度涂层

研究了粉末球磨时间、烧结温度对涂层微观组织形貌和结合处的影响

并测试涂层的致密度

以期将基体耐高温性能和涂层导电的电学性能相结合

满足火花塞等产品的功能要求。结果表明

粉末球磨时间为24h

在1 300℃下制备的试样

涂层微观组织较为均匀

界面结合较好

制得的试样较为致密。

Abstract

Cobalt-based functional gradient coating was prepared on alumina ceramic by microwave sintered with Co-based self-fluxing alloy powder and alumina ceramic powder as raw materials.Effects of different powder ball-milling time and sintering temperature on microstructure and bonding interface of coating were investigated

and relative density of the coating was measured.The results reveal that after balling for 24hours

the coating prepared at 1 300℃possesses homogeneous microstructure and desirable bonding interface as well as high relative density.