基于AMESim和Simulink的慢压射过程闭环模糊控制的联合仿真

马俊; 戴挺; 杨杰; 周怡君

doi:10.15980/j.tzzz.2014.03.019

压力铸造 | 浏览量 : 0 下载量: 106 CSCD: 0

导出
分享
收藏
专辑

基于AMESim和Simulink的慢压射过程闭环模糊控制的联合仿真
Co-Simulation of Fuzzy Control of Slow Shot Based on AMESim/Simulink
2014年34卷第3期页码：273-275
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.03.019

扫描看全文

[1]马俊,戴挺,杨杰,周怡君.基于AMESim和Simulink的慢压射过程闭环模糊控制的联合仿真[J].特种铸造及有色合金,2014,34(03):273-275.

Ma Jun, Dai Ting, Yang Jie, et al. Co-Simulation of Fuzzy Control of Slow Shot Based on AMESim/Simulink[J]. Special Casting & Nonferrous Alloys, 2014,34(3):273-275.
[1]马俊,戴挺,杨杰,周怡君.基于AMESim和Simulink的慢压射过程闭环模糊控制的联合仿真[J].特种铸造及有色合金,2014,34(03):273-275. DOI： 10.15980/j.tzzz.2014.03.019.

Ma Jun, Dai Ting, Yang Jie, et al. Co-Simulation of Fuzzy Control of Slow Shot Based on AMESim/Simulink[J]. Special Casting & Nonferrous Alloys, 2014,34(3):273-275. DOI： 10.15980/j.tzzz.2014.03.019.

摘要

根据慢压射理论

设定慢压射速度

在AMESim和MATLAB/Simulink的平台上实现慢压射过程的联合仿真

并运用模糊控制对压射速度进行闭环控制。结果表明

实际压射速度与预设压射速度相符合

而且没有超调

响应性也很好

对实际生产中慢压射速度的控制具有参考作用。

Abstract

Based on slow shot theory

the preset velocity was set

and the simulation mode of fuzzy control of slow shot was established based on the AMESim and MATLAB/Simulink platform.The closedloop control for the injection velocity was realized by the fuzzy control.The results reveal that the actual velocity is well in agreement with the preset velocity with fast responsiveness and absence of overshoot

so it can guide the control of slow shot speed in practice.