连铸生产高碳钢方坯轻压下技术应用参数的选取

张冰成; 金美余; 李志刚; 郑川立; 吴应国

doi:10.15980/j.tzzz.2014.01.036

连续铸造 | 浏览量 : 0 下载量: 191 CSCD: 1

导出
分享
收藏
专辑

连铸生产高碳钢方坯轻压下技术应用参数的选取
Determination of Parameters of Soft Reduction in High Carbon Steel Continuous Casting Blooms
2014年34卷第1期页码：32-33
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.01.036

扫描看全文

[1]张冰成,金美余,李志刚,郑川立,吴应国.连铸生产高碳钢方坯轻压下技术应用参数的选取[J].特种铸造及有色合金,2014,34(01):32-33.

Zhang Bingcheng, Jin Meiyu, Li Zhigang, et al. Determination of Parameters of Soft Reduction in High Carbon Steel Continuous Casting Blooms[J]. Special Casting & Nonferrous Alloys, 2014,34(1):32-33.
[1]张冰成,金美余,李志刚,郑川立,吴应国.连铸生产高碳钢方坯轻压下技术应用参数的选取[J].特种铸造及有色合金,2014,34(01):32-33. DOI： 10.15980/j.tzzz.2014.01.036.

Zhang Bingcheng, Jin Meiyu, Li Zhigang, et al. Determination of Parameters of Soft Reduction in High Carbon Steel Continuous Casting Blooms[J]. Special Casting & Nonferrous Alloys, 2014,34(1):32-33. DOI： 10.15980/j.tzzz.2014.01.036.

摘要

轻压下技术应用于高碳钢方坯连铸中可改善铸坯偏析。压下参数的选取对于轻压下技术至关重要。通过理论分析并结合生产实践经验

认为压下位置在中心固相率为30%

0%、总压下量为4

mm时

轻压下效果最佳。合理地应用轻压下技术

可以有效地改善铸坯微观及宏观组织。

Abstract

Soft reduction can reduce segregation in high carbon steel continuous casting slab.Determination of reduction parameters is very important to the soft reduction technology.Based on the theoretical analysis and the practical product from some plants

it is found that the desirable soft reduction effects can be obtained with solid fraction in 30%

0%and the total reduction in 4

mm.The soft reduction process can improve the macro structure and carbon segregation at center.

关键词

高碳钢轻压下V型偏析中心碳偏析指数

Keywords

High Carbon SteelSoft ReductionV Shape SegregationCenter Carbon Segregation

references

文章被引用时，请邮件提醒。

提交

暂无数据