V法铸造涂料干燥性能的研究

消失模与V法铸造 | 浏览量 : 0 下载量: 185 CSCD: 0

扫描看全文

[1]杨帆,李远才,肖莹,赵溶,杨严军.V法铸造涂料干燥性能的研究[J].特种铸造及有色合金,2013,33(08):759-762.

Yang Fan1, Li Yuancai1, Xiao Ying1, et al. Drying Performance of Coatings for V-Casting[J]. Special Casting & Nonferrous Alloys, 2013,33(8):759-762.
[1]杨帆,李远才,肖莹,赵溶,杨严军.V法铸造涂料干燥性能的研究[J].特种铸造及有色合金,2013,33(08):759-762. DOI： 10.15980/j.tzzz.2013.08.029.

Yang Fan1, Li Yuancai1, Xiao Ying1, et al. Drying Performance of Coatings for V-Casting[J]. Special Casting & Nonferrous Alloys, 2013,33(8):759-762. DOI： 10.15980/j.tzzz.2013.08.029.

提出综合利用颜色判定法和划痕法来判定涂料干燥性能的方式。试验表明

该测量方式稳定、准确;基于该测试方法

试验得到耐火骨料粒径的增大

酒精、酚醛树脂、F-80加入量的减少都有利于涂料干燥性能的提高;在保证涂料其他性能满足要求的条件下

可通过控制涂料的各组分提高涂层的干燥性能。

The method of utilizing color determining combining with scratch methods to determine whether the coating had been dried or not was investigated

which was proved to be stable and accurate through experiments.Based on this method

the results show that with increasing in size of refractory particle and decreasing in alcohol

phenol resin

F-80 added

the drying performance of the coating is improved.Therefore

the drying performance of coatings can be improved through controlling the component of coatings on the basis of other performances met.

V法铸造铸造涂料干燥性能

V-CastingFoundry CoatingDrying Performance

文章被引用时，请邮件提醒。

提交

暂无数据