半连续铸造高合金化铝合金过程的数值模拟

汤林志; 李志辉; 范云强; 刘君城; 李锡武; 张永安; 熊柏青

doi:10.15980/j.tzzz.2013.08.014

实用研究 | 浏览量 : 0 下载量: 223 CSCD: 1

导出
分享
收藏
专辑

半连续铸造高合金化铝合金过程的数值模拟
Numerical Simulation of Direct-Chill Casting Process of Semi-Continuous Casting Aluminum Alloy with High Alloying Components
2013年33卷第8期页码：707-710
纸质出版日期： 2013 ，
DOI： 10.15980/j.tzzz.2013.08.014

扫描看全文

[1]汤林志,李志辉,范云强,刘君城,李锡武,张永安,熊柏青.半连续铸造高合金化铝合金过程的数值模拟[J].特种铸造及有色合金,2013,33(08):707-710.

Tang Linzhi1, Li Zhihui2, Fan Yunqiang1, et al. Numerical Simulation of Direct-Chill Casting Process of Semi-Continuous Casting Aluminum Alloy with High Alloying Components[J]. Special Casting & Nonferrous Alloys, 2013,33(8):707-710.
[1]汤林志,李志辉,范云强,刘君城,李锡武,张永安,熊柏青.半连续铸造高合金化铝合金过程的数值模拟[J].特种铸造及有色合金,2013,33(08):707-710. DOI： 10.15980/j.tzzz.2013.08.014.

Tang Linzhi1, Li Zhihui2, Fan Yunqiang1, et al. Numerical Simulation of Direct-Chill Casting Process of Semi-Continuous Casting Aluminum Alloy with High Alloying Components[J]. Special Casting & Nonferrous Alloys, 2013,33(8):707-710. DOI： 10.15980/j.tzzz.2013.08.014.

摘要

基于ANSYS有限元模拟软件建立了铝合金半连续铸造过程的数值模型。研究了起始铸造速度持续时间、铸造温度、铸造速度、刮水板等工艺参数对铸锭温度场和应力场的影响。研究表明

延长起始阶段低铸速的持续时间

会使液穴更晚达到稳定状态;铸造温度和铸造速度对液穴深度的影响具有线性关系;设置刮水板能使铸锭表面温度回升

从而减小铸坯心部和表面温差

有效地降低了铸坯中心的热应力。

Abstract

A numerical model based on ANSYS software package was developed to simulate the DC casting process of aluminum alloy.Effects of semi-continuous parameters

such as duration time of initial velocity

pouring temperature

drawing velocity

wipe panel

on temperature fields and stress fields of ingot were investigated.The results show that with increasing in the duration time of initial casting speed

the meniscus shape tended to be stable is postponed.There exists obvious linearity relationship between sump depth and casting temperature or casting speed.Because of wipe panel increasing the ingot surface temperature to reduce the temperature difference of ingot heart and surface

the thermal stress in center of ingot is decreased greatly.