连铸板坯二冷区辊式电磁搅拌器搅拌方式模拟

李建超; 尹永昌; 王宝峰

doi:10.15980/j.tzzz.2013.04.034

实用研究 | 浏览量 : 0 下载量: 223 CSCD: 1

导出
分享
收藏
专辑

连铸板坯二冷区辊式电磁搅拌器搅拌方式模拟
Numerical Simulation of Stirring Modes for Roll-type Electromagnetic Stirring in the Secondary Cooling Zone of the Continuous Casting Slab
2013年33卷第4期页码：302-305
纸质出版日期： 2013 ，
DOI： 10.15980/j.tzzz.2013.04.034

扫描看全文

[1]李建超,尹永昌,王宝峰.连铸板坯二冷区辊式电磁搅拌器搅拌方式模拟[J].特种铸造及有色合金,2013,33(04):302-305.

Li Jianchao1, Yin Yongchang2, Wang Baofeng2. Numerical Simulation of Stirring Modes for Roll-type Electromagnetic Stirring in the Secondary Cooling Zone of the Continuous Casting Slab[J]. Special Casting & Nonferrous Alloys, 2013,33(4):302-305.
[1]李建超,尹永昌,王宝峰.连铸板坯二冷区辊式电磁搅拌器搅拌方式模拟[J].特种铸造及有色合金,2013,33(04):302-305. DOI： 10.15980/j.tzzz.2013.04.034.

Li Jianchao1, Yin Yongchang2, Wang Baofeng2. Numerical Simulation of Stirring Modes for Roll-type Electromagnetic Stirring in the Secondary Cooling Zone of the Continuous Casting Slab[J]. Special Casting & Nonferrous Alloys, 2013,33(4):302-305. DOI： 10.15980/j.tzzz.2013.04.034.

摘要

在板坯连铸二冷区采用电磁搅拌能够有效地改善铸坯品质

如提高等轴晶率等。利用有限元模拟软件ANSYS对连铸板坯二冷区辊式电磁搅拌器进行了数值模拟。结果表明

当两组辊式电磁搅拌器的间距为5辊间距（1200mm）时

三环式搅拌方式优于双蝶式;当两组辊式电磁搅拌器紧邻（0mm）时

双蝶式搅拌优于三环式搅拌。

Abstract

Electromagnetic stirring in secondary cooling zone of continuous casting slab can play an important role in improving the quality of slab

such as increasing equiaxed crystal ratio. Numerical simulation was conducted for roll-type electromagnetic stirring in the secondary cooling zone of the continuous casting slab by means of finite element analysis software ANSYS. The results show that when the distance of two groups of electromagnetic stirrer is 1 220 mm

the three-ring-like type is better than the ambi-butterfly type in stirring efficiency. While the two groups of electromagnetic stirrer are adjacent （0 mm）

the ambi-butterfly type is better than the three-ringlike type in stirring efficiency.