铸锻一体化成形技术与装备研究

王顺成; 郑开宏; 戚文军; 蔡畅; 王海艳

doi:10.15980/j.tzzz.2013.03.016

实用研究 | 浏览量 : 0 下载量: 377 CSCD: 7

导出
分享
收藏
专辑

铸锻一体化成形技术与装备研究
Research on Equipments and Integrated Forming Technology of Casting and Forging
2013年33卷第3期页码：220-223
纸质出版日期： 2013 ，
DOI： 10.15980/j.tzzz.2013.03.016

扫描看全文

[1]王顺成,郑开宏,戚文军,蔡畅,王海艳.铸锻一体化成形技术与装备研究[J].特种铸造及有色合金,2013,33(03):220-223.

Wang Shuncheng, Zheng Kaihong, Qi Wenjun, et al. Research on Equipments and Integrated Forming Technology of Casting and Forging[J]. Special Casting & Nonferrous Alloys, 2013,33(3):220-223.
[1]王顺成,郑开宏,戚文军,蔡畅,王海艳.铸锻一体化成形技术与装备研究[J].特种铸造及有色合金,2013,33(03):220-223. DOI： 10.15980/j.tzzz.2013.03.016.

Wang Shuncheng, Zheng Kaihong, Qi Wenjun, et al. Research on Equipments and Integrated Forming Technology of Casting and Forging[J]. Special Casting & Nonferrous Alloys, 2013,33(3):220-223. DOI： 10.15980/j.tzzz.2013.03.016.

摘要

介绍了铸锻一体化成形用6000kN铸锻液压机和铸锻模具的结构特点

研究了A356铝合金铸锻一体化成形工艺和铸锻件的组织与性能。结果表明

铸锻液压机集侧面送料、压力铸造和精密锻造功能于一体。通过低速充型铸造

可以避免金属液卷气。通过大面积、大变形量的精确锻造

能对凝固金属进行有效补缩和压实组织

显著提高铸锻件的组织致密度和力学性能。A356铝合金铸锻件经T6热处理后的抗拉强度达到320～335MPa

比未进行锻造时的抗拉强度平均提高了17%。

Abstract

The characteristics of the casting-forging hydraulic press with 6 000 kN and its die were described.The process of casting-forging and the microstructure as well as mechanical properties of A356 aluminum alloy prepared by the casting-forging technology were investigated.The results show that the casting-forging hydraulic press manufactured by self-designing has multi-functions such as side feeding

press casting and precision forging.The gas-entrappment in the parts can be avoided through the low speed casting.The soundness and the mechanical properties of the parts can be improved significantly through the forging with large area and large deformation.The tensile strength of A356 aluminum alloy parts with T6 heat treatment is 320

35 MPa

increased by 17% compared with that of A356 aluminum alloy parts without forging.