新型镁合金AZ63H的开发

王峰; 陈体军; 黄连凯

doi:10.15980/j.tzzz.2012.11.028

轻有色合金 | 浏览量 : 0 下载量: 107 CSCD: 4

导出
分享
收藏
专辑

新型镁合金AZ63H的开发
Development of New Magnesium Alloy AZ63H
2012年32卷第11期页码：1066-1069
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.11.028

扫描看全文

[1]王峰,陈体军,黄连凯.新型镁合金AZ63H的开发[J].特种铸造及有色合金,2012,32(11):1066-1069.

Wang Feng1, Chen Tijun1, Huang Liankai1. Development of New Magnesium Alloy AZ63H[J]. Special Casting & Nonferrous Alloys, 2012,32(11):1066-1069.
[1]王峰,陈体军,黄连凯.新型镁合金AZ63H的开发[J].特种铸造及有色合金,2012,32(11):1066-1069. DOI： 10.15980/j.tzzz.2012.11.028.

Wang Feng1, Chen Tijun1, Huang Liankai1. Development of New Magnesium Alloy AZ63H[J]. Special Casting & Nonferrous Alloys, 2012,32(11):1066-1069. DOI： 10.15980/j.tzzz.2012.11.028.

摘要

为提高AZ63镁合金的铸造性能和力学性能

添加Y、Nd、Sn和Ca4种元素并采用正交试验法

然后通过进一步细化试验参数

优选出新型镁合金AZ63H的添加成分（质量分数

下同）为:0.5%的Y、0.5%的Nd、0.5%的Sn、0.5%的Ca。试验结果表明

AZ63H的抗拉强度和伸长率分别为235MPa和8.3%

T6热处理后其抗拉强度和伸长率分别为289MPa和11.8%。该合金与国内外常用镁合金相比

表现出良好的力学性能。

Abstract

In order to improve the mechanical properties and casting properties of AZ63 magnesium alloy

different content elements including Y

Sn and Ca were added. The composition of the new Mg alloy AZ63 optimized by orthogonal experiment is as follows: 0.5%Y

9.5%Nd

0.5%Sn and 0.5%Ca. The mechanical properties of AZ63H alloy were tested. The results show that as-cast tensile strength and elongation of the alloy reach 235 MPa and 8.3%

respectively

while after the T6 heat treatment

they are 289 MPa and 11.8% respectively. The new Mg alloy exhibits the better mechanical properties compared with conventional Mg alloys.