5083铝合金半固态浆料流变成形的组织与性能

王家宣; 李超; 刘昭亮; 李文杰; 邱泽廷; 胡鹏程

doi:10.15980/j.tzzz.2012.11.015

半固态加工 | 浏览量 : 0 下载量: 128 CSCD: 1

导出
分享
收藏
专辑

5083铝合金半固态浆料流变成形的组织与性能
Rheology Forming of Semi-solid 5083 Aluminum Alloy Slurry and its Microstructure and Properties
2012年32卷第11期页码：1023-1026
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.11.015

扫描看全文

[1]王家宣,李超,刘昭亮,李文杰,邱泽廷,胡鹏程.5083铝合金半固态浆料流变成形的组织与性能[J].特种铸造及有色合金,2012,32(11):1023-1026.

Wang Jiaxuan, Li Chao, Liu Zhaoliang, et al. Rheology Forming of Semi-solid 5083 Aluminum Alloy Slurry and its Microstructure and Properties[J]. Special Casting & Nonferrous Alloys, 2012,32(11):1023-1026.
[1]王家宣,李超,刘昭亮,李文杰,邱泽廷,胡鹏程.5083铝合金半固态浆料流变成形的组织与性能[J].特种铸造及有色合金,2012,32(11):1023-1026. DOI： 10.15980/j.tzzz.2012.11.015.

Wang Jiaxuan, Li Chao, Liu Zhaoliang, et al. Rheology Forming of Semi-solid 5083 Aluminum Alloy Slurry and its Microstructure and Properties[J]. Special Casting & Nonferrous Alloys, 2012,32(11):1023-1026. DOI： 10.15980/j.tzzz.2012.11.015.

摘要

通过自制的对向式双振动头超声处理装置作用于5083合金半固态浆料并进行流变挤压铸造成形

研究了流变挤压铸造成形工艺和熔体浇注温度等对合金半固态成形制件的组织及力学性能的影响。结果表明

流变成形工艺对合金半固态组织有明显的改善作用

使晶粒更细小、致密、均匀;功率超声和流变挤压铸造能显著提高合金的力学性能;成形制件的组织和力学性能在浇注温度为645℃时最好。

Abstract

Semi-solid 5083 aluminum alloy slurry which treated by self-developed ultrasonic devices with subtended double ultrasonic vibration heads was formed by rheological squeezing casting

and effects of rheological forging process and different pouring temperatures on the microstructure and mechanical properties of the semi-solid 5083 forming parts were investigated. The results show that microstructure of rheological formed semi-solid alloy parts is improved greatly

in which fine

dense and uniform distributed grain can be observed. Mechanical properties of the alloy parts prepared can be increased significantly by power ultrasound and rheological forging process. With the pouring temperature of 645 ℃

the microstructure and mechanical properties of the forming parts become desirable.