Dci11发动机齿轮室铝合金压铸件开发

王泽忠; 张芳; 袁海波; 雷健; 康明

doi:10.15980/j.tzzz.2012.10.015

压力铸造 | 浏览量 : 0 下载量: 77 CSCD: 1

导出
分享
收藏
专辑

Dci11发动机齿轮室铝合金压铸件开发
Development of Al-alloy Gear Box for Dci11 Engine
2012年32卷第10期页码：912-915
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.10.015

扫描看全文

[1]王泽忠,张芳,袁海波,雷健,康明.Dci11发动机齿轮室铝合金压铸件开发[J].特种铸造及有色合金,2012,32(10):912-915.

Wang Zezhong, Zhang Fang, Yuan Haibo, et al. Development of Al-alloy Gear Box for Dci11 Engine[J]. Special Casting & Nonferrous Alloys, 2012,32(10):912-915.
[1]王泽忠,张芳,袁海波,雷健,康明.Dci11发动机齿轮室铝合金压铸件开发[J].特种铸造及有色合金,2012,32(10):912-915. DOI： 10.15980/j.tzzz.2012.10.015.

Wang Zezhong, Zhang Fang, Yuan Haibo, et al. Development of Al-alloy Gear Box for Dci11 Engine[J]. Special Casting & Nonferrous Alloys, 2012,32(10):912-915. DOI： 10.15980/j.tzzz.2012.10.015.

摘要

以齿轮室为例

利用铸造CAE软件对大型复杂铝合金压铸件进行工艺设计及模具开发

并用结构CAE软件对设计进行优化

成功开发出Dci11发动机压铸件。

Abstract

An Al-alloy gear box for Dci11 engine was designed and developed by using the CAE software.The design was optimized by structural CAE software.The Dci11 engine was produced successfully.