网格装配技术在复杂砂型铸件网格生成中的应用

袁兴茂; 智小慧

doi:10.15980/j.tzzz.2012.10.003

计算机应用技术 | 浏览量 : 0 下载量: 127 CSCD: 4

导出
分享
收藏
专辑

网格装配技术在复杂砂型铸件网格生成中的应用
Application of Grid Assembly Technology in the Grid Generation of Complex Sand-mould Casting
2012年32卷第10期页码：897-900
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.10.003

扫描看全文

[1]袁兴茂,智小慧.网格装配技术在复杂砂型铸件网格生成中的应用[J].特种铸造及有色合金,2012,32(10):897-900.

Yuan Xingmao, Zhi Xiaohui. Application of Grid Assembly Technology in the Grid Generation of Complex Sand-mould Casting[J]. Special Casting & Nonferrous Alloys, 2012,32(10):897-900.
[1]袁兴茂,智小慧.网格装配技术在复杂砂型铸件网格生成中的应用[J].特种铸造及有色合金,2012,32(10):897-900. DOI： 10.15980/j.tzzz.2012.10.003.

Yuan Xingmao, Zhi Xiaohui. Application of Grid Assembly Technology in the Grid Generation of Complex Sand-mould Casting[J]. Special Casting & Nonferrous Alloys, 2012,32(10):897-900. DOI： 10.15980/j.tzzz.2012.10.003.

摘要

在使用ProCAST前处理模块进行复杂砂型铸件网格划分的过程中

经常遇到铸件接触面出现交叉网格的问题

这给模拟工作带来很大困难。为此研究了Pro/E与ProCAST之间的接口方式

并对几种网格生成方法做了对比。最终发现采用网格装配技术能很好地避免模型接触面交叉网格的出现。网格装配技术不仅保证了网格质量

还降低了网格划分的工作难度

提高了工作效率。通过一个砂型铸造的实例验证了这一方法的可行性。

Abstract

Intersection grid easily appeared on the casting contact surfaces during grid meshment process of the complex sand-mould casting by using the preprocess module of ProCAST

which brought many difficulties to the numerical simulation.The interface mode between the Pro/E and ProCAST was analyzed

and several methods of grid generation were compared.The results show that intersection grid on the contact surface can be well avoided by using the grid assembly technology.The grid assembly technology not only ensures the grid quality

but also reduces the difficulty of meshment and improves the work efficiency.The feasibility of the technology is validated by an application example of sand-mould casting.