低压铸造件粘砂缺陷产生原因及预防措施

王德清; 史勇

doi:10.15980/j.tzzz.2012.07.029

压力铸造 | 浏览量 : 0 下载量: 105 CSCD: 0

导出
分享
收藏
专辑

低压铸造件粘砂缺陷产生原因及预防措施
Origination and Countermeasures of Sticking Sand in Low-pressure Casting ZL104 Inter-Axis Transfer Case Body
2012年32卷第7期页码：621-623
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.07.029

扫描看全文

[1]王德清,史勇.低压铸造件粘砂缺陷产生原因及预防措施[J].特种铸造及有色合金,2012,32(07):621-623.

Wang Deqing, Shi Yong. Origination and Countermeasures of Sticking Sand in Low-pressure Casting ZL104 Inter-Axis Transfer Case Body[J]. Special Casting & Nonferrous Alloys, 2012,32(7):621-623.
[1]王德清,史勇.低压铸造件粘砂缺陷产生原因及预防措施[J].特种铸造及有色合金,2012,32(07):621-623. DOI： 10.15980/j.tzzz.2012.07.029.

Wang Deqing, Shi Yong. Origination and Countermeasures of Sticking Sand in Low-pressure Casting ZL104 Inter-Axis Transfer Case Body[J]. Special Casting & Nonferrous Alloys, 2012,32(7):621-623. DOI： 10.15980/j.tzzz.2012.07.029.

摘要

某轴间分动箱本体铸件

材质为ZL104

采用砂型低压铸造工艺生产

粘砂缺陷较为严重

通过统计分析

发现铸件粘砂产生的原因主要有:型砂中再生砂含量偏高

砂型（芯）烘烤温度过高

芯盒结构不合理

未设置结壳阶段。降低型砂中再生砂含量和砂型（芯）烘烤温度

防止砂型（芯）开裂;合理设计模具结构

通过舂砂保证砂型（芯）的紧实度;增设结壳阶段等

对预防粘砂效果明显。

Abstract

There exists serious sticking sand in low pressure sand casting ZL104 inter-axis transfer case

which is attributed to a higher reclaimed-sand in mold sand

a high baking temperature of sand mold（core） and un-rational core-box configuration as well as un-set incrustation.Through decreasing reclaimed-sand content in the mold sand and baking temperature of sand mold（core） to prevent sand mold（core） from crack

designing rational mould structure to increase compact degree by vibration as well as setting incrustation

sticking sand can be eliminated effectively.