红外测温在工频炉熔炼铝合金中的应用

牟俊东; 冯增建; 李艳军; 王建强; 杜恩民; 丁勇

doi:10.15980/j.tzzz.2012.06.037

轻有色合金 | 浏览量 : 0 下载量: 157 CSCD: 0

导出
分享
收藏
专辑

红外测温在工频炉熔炼铝合金中的应用
Application of Infrared Temperature Measurement to Smelting the Al Alloy in Induction Furnace
2012年32卷第6期页码：568-570
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.06.037

扫描看全文

[1]牟俊东,冯增建,李艳军,王建强,杜恩民,丁勇.红外测温在工频炉熔炼铝合金中的应用[J].特种铸造及有色合金,2012,32(06):568-570.

Mou Jundong, Feng Zengjian, Li Yanjun, et al. Application of Infrared Temperature Measurement to Smelting the Al Alloy in Induction Furnace[J]. Special Casting & Nonferrous Alloys, 2012,32(6):568-570.
[1]牟俊东,冯增建,李艳军,王建强,杜恩民,丁勇.红外测温在工频炉熔炼铝合金中的应用[J].特种铸造及有色合金,2012,32(06):568-570. DOI： 10.15980/j.tzzz.2012.06.037.

Mou Jundong, Feng Zengjian, Li Yanjun, et al. Application of Infrared Temperature Measurement to Smelting the Al Alloy in Induction Furnace[J]. Special Casting & Nonferrous Alloys, 2012,32(6):568-570. DOI： 10.15980/j.tzzz.2012.06.037.

摘要

介绍了以红外测温方式替代热电偶+保护套管应用于工频炉熔融铝液的温度测控新方式

以及红外测温工作基础及原理。介绍了红外测温应用在工频炉上的主要工艺技术特点及关键技术

对红外测温的适用性进行了验证分析

提出了相应的工艺要求。经实践验证

红外测温能够较好地应用于工频炉熔配铝液温度的测量控制。

Abstract

The temperature measurement of molten Al alloy in main frequency furnace was conducted by the infrared technology instead of the thermo-couple and protection sleeve.The working principle of the infrared technology was introduced

and the main technological features and the key technology were described.The feasibility of the measuring method was analyzed

and the related technological requirements were presented.The practical application verified that the infrared technology could be applied for the temperature measuring of the molten Al alloy in the main frequency furnace.

关键词

红外测温铝液工频炉

Keywords

Infrared Temperature MeasurementAluminum AlloysInduction Furnace

references

文章被引用时，请邮件提醒。

提交

暂无数据