薄壁铝合金铸件石膏型真空浇注加压凝固铸造工艺

王涛; 陈超英; 张喜山; 唐友辉

doi:10.15980/j.tzzz.2012.03.030

精密铸造 | 浏览量 : 0 下载量: 321 CSCD: 6

导出
分享
收藏
专辑

薄壁铝合金铸件石膏型真空浇注加压凝固铸造工艺
Production of Thin-walled Aluminum Castings with Gypsum Mold Casting Combining with Vacuum Pouring and Solidification Under Pressure
2012年32卷第3期页码：264-266
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.03.030

扫描看全文

[1]王涛,陈超英,张喜山,唐友辉.薄壁铝合金铸件石膏型真空浇注加压凝固铸造工艺[J].特种铸造及有色合金,2012,32(03):264-266.

Wang Tao1, Chen Chaoying1, Zhang Xishan1, et al. Production of Thin-walled Aluminum Castings with Gypsum Mold Casting Combining with Vacuum Pouring and Solidification Under Pressure[J]. Special Casting & Nonferrous Alloys, 2012,32(3):264-266.
[1]王涛,陈超英,张喜山,唐友辉.薄壁铝合金铸件石膏型真空浇注加压凝固铸造工艺[J].特种铸造及有色合金,2012,32(03):264-266. DOI： 10.15980/j.tzzz.2012.03.030.

Wang Tao1, Chen Chaoying1, Zhang Xishan1, et al. Production of Thin-walled Aluminum Castings with Gypsum Mold Casting Combining with Vacuum Pouring and Solidification Under Pressure[J]. Special Casting & Nonferrous Alloys, 2012,32(3):264-266. DOI： 10.15980/j.tzzz.2012.03.030.

摘要

对采用石膏型真空浇注加压凝固铸造工艺生产一项典型的铝合金薄壁铸件的工艺过程进行了探讨。通过对石膏型铸型制备工艺的控制及添加剂的合理使用

采用多点布局的开放式浇注系统

并对充型时间、浇注位置、铸型温度和金属液浇注温度等浇注工艺参数进行试验优化

最终确定了合理的浇注工艺参数组合

成功生产出满足技术要求的薄壁铝合金精铸件。

Abstract

The production of a typical thin-walled aluminum castings with gypsum mold casting combining with pouring in vacuum pouring and solidification under pressure was performed.By controlling the gypsum mold making process and reasonable additive use

adopting open-gating system with multi-point arrangement

and optimized pouring parameters

such as pouring time

pouring position

the mold temperature and pouring temperature

the thin-walled aluminum castings were produced successfully

which met the requirement of the specification.