真空差压铸造薄壁铸件的研究进展

熊博文; 余欢; 严青松; 徐志锋; 蔡长春; 王嘉辉; 杨振

doi:10.15980/j.tzzz.2012.03.024

专题论述 | 浏览量 : 0 下载量: 650 CSCD: 15

导出
分享
收藏
专辑

真空差压铸造薄壁铸件的研究进展
Research Progress in Vacuum Counter-pressure Casting Thin-Walled Components
2012年32卷第3期页码：238-242
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.03.024

扫描看全文

[1]熊博文,余欢,严青松,徐志锋,蔡长春,王嘉辉,杨振.真空差压铸造薄壁铸件的研究进展[J].特种铸造及有色合金,2012,32(03):238-242.

Xiong Bowen1, Yu Huan2, Yan Qingsong2, et al. Research Progress in Vacuum Counter-pressure Casting Thin-Walled Components[J]. Special Casting & Nonferrous Alloys, 2012,32(3):238-242.
[1]熊博文,余欢,严青松,徐志锋,蔡长春,王嘉辉,杨振.真空差压铸造薄壁铸件的研究进展[J].特种铸造及有色合金,2012,32(03):238-242. DOI： 10.15980/j.tzzz.2012.03.024.

Xiong Bowen1, Yu Huan2, Yan Qingsong2, et al. Research Progress in Vacuum Counter-pressure Casting Thin-Walled Components[J]. Special Casting & Nonferrous Alloys, 2012,32(3):238-242. DOI： 10.15980/j.tzzz.2012.03.024.

摘要

大量的薄壁铸件广泛应用于航空航天和国防领域

而真空差压铸造因具有良好的充型和凝固条件

被用于生产高质量的复杂薄壁铸件。目前真空差压铸造薄壁件引起了国内外研究者的广泛关注

为此对真空差压铸造控制系统、薄壁铸件充型以及凝固等方面的研究进展作了介绍

详述了真空差压铸造分级变压控制系统、薄壁铸件充型流态模型、凝固组织与补缩能力

并就目前该研究中存在的问题及今后的发展方向提出了建议。

Abstract

Amounts of thin-walled castings have been used in aerospace

spaceflight and defense technology industry.The vacuum counter-pressure casting technology has been extensively employed to the production of high quality thin-walled components due to the advantage of filling and solidification.The vacuum counter-pressure casting thin-walled components have attracted much attention at home and abroad.The recent research progress in the control system of vacuum counter-pressure casting

filling behavior and solidification process of thin-walled castings were described.The grade-pressure control system of vacuum counter-pressure casting

filling behavior models

microstructures and feeding capacity of vacuum counter-pressure casting were introduced in detail.Finally

the existing problems were put forward and the future prospect was presented.