高纯Al<sub>2</sub>O<sub>3</sub>陶瓷材料的摩擦磨损行为

童幸生; 陈禧; 马一; 马南钢

doi:10.15980/j.tzzz.2012.02.004

实用研究 | 浏览量 : 0 下载量: 158 CSCD: 1

导出
分享
收藏
专辑

高纯Al₂O₃陶瓷材料的摩擦磨损行为
Friction Behavior of Low Friction and Wear Resistant High-Purity Alumina Ceramic
2012年32卷第2期页码：123-126
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.02.004

扫描看全文

[1]童幸生,陈禧,马一,马南钢.高纯Al_2O_3陶瓷材料的摩擦磨损行为[J].特种铸造及有色合金,2012,32(02):123-126.

Tong Xingsheng1, Chen Xi2, Ma Yi3, et al. Friction Behavior of Low Friction and Wear Resistant High-Purity Alumina Ceramic[J]. Special Casting & Nonferrous Alloys, 2012,32(2):123-126.
[1]童幸生,陈禧,马一,马南钢.高纯Al_2O_3陶瓷材料的摩擦磨损行为[J].特种铸造及有色合金,2012,32(02):123-126. DOI： 10.15980/j.tzzz.2012.02.004.

Tong Xingsheng1, Chen Xi2, Ma Yi3, et al. Friction Behavior of Low Friction and Wear Resistant High-Purity Alumina Ceramic[J]. Special Casting & Nonferrous Alloys, 2012,32(2):123-126. DOI： 10.15980/j.tzzz.2012.02.004.

摘要

对比研究了所制备的几种不同高纯Al2O3陶瓷材料在相同的试验条件下的摩擦磨损性能。结果表明

摩擦因数随成分不同而发生变化

其磨损机制以塑性变形为主

压力过大时

磨损机制由塑性变形转变为脆性断裂。Al2O3陶瓷材料中增加一些改性材料并保证材料表面光滑平整

对提高耐磨性是有利的。

Abstract

Wear and frictional behavior of different high purity aluminum ceramic prepared were investigated comparatively. The results show that frictional coefficient is changed with ceramic components. The plastic deformation is dominant in the wear mechanism. However

with increasing in presure

the wear mechanism is changed from plastic deformation into brittle fracture. Through adding modified composition in the Al2O3 ceramics and keeping the smooth surface

it is favorable to improving the wear resistance of the ceramics.