压铸机压室温度分布与变形的二维模拟

杨湘杰; 沈波涌; 饶磊; Qi Shi

doi:10.15980/j.tzzz.2000.s1.016

浏览量 : 0 下载量: 84 CSCD: 8

导出
分享
收藏
专辑

压铸机压室温度分布与变形的二维模拟
2-D Simulation of Temperature Distribution and Deformation in Shot Sleeve of Die Casting Machine
2000年第S1期页码：51-54
纸质出版日期： 2000 ，
DOI： 10.15980/j.tzzz.2000.s1.016

扫描看全文

[1]杨湘杰,沈波涌,饶磊,Qi Shi.压铸机压室温度分布与变形的二维模拟[J].特种铸造及有色合金,2000(S1):51-54.

Yang Xiangjie Shen Yongbo Rao Lei. 2-D Simulation of Temperature Distribution and Deformation in Shot Sleeve of Die Casting Machine[J]. Special Casting & Nonferrous Alloys, 2000,(S1):51-54.
[1]杨湘杰,沈波涌,饶磊,Qi Shi.压铸机压室温度分布与变形的二维模拟[J].特种铸造及有色合金,2000(S1):51-54. DOI： 10.15980/j.tzzz.2000.s1.016.

Yang Xiangjie Shen Yongbo Rao Lei. 2-D Simulation of Temperature Distribution and Deformation in Shot Sleeve of Die Casting Machine[J]. Special Casting & Nonferrous Alloys, 2000,(S1):51-54. DOI： 10.15980/j.tzzz.2000.s1.016.

摘要

针对卧式冷室压铸机压室的工作环境

提出三种不同的热传递数学模型。使用ABAQUS软件模拟压室在工作过程中的二维温度分布的几何变形状况。对比模拟和试验结果

得到了优化的数学模型

Abstract

Three heat transfer mathematical models are given based on working condition of horizontal cold chamber die casting machine.Geometrical deformation of 2 D temperature distribution during shot sleeve working is simulated by ABAQUS software.By comparison between simulation and experimental results

optimizing mathematical model has been made.