铜电磁连铸的数值计算

杨海西; 龚涛; 雷作胜; 邓康; 任忠鸣

doi:10.15980/j.tzzz.2000.05.022

浏览量 : 0 下载量: 123 CSCD: 4

导出
分享
收藏
专辑

铜电磁连铸的数值计算
Numerical Calculation on Electromagnetic Continuous Casting of Copper Billet
2000年第5期页码：51-52
纸质出版日期： 2000 ，
DOI： 10.15980/j.tzzz.2000.05.022

扫描看全文

[1]杨海西,龚涛,雷作胜,邓康,任忠鸣.铜电磁连铸的数值计算[J].特种铸造及有色合金,2000(05):51-52+0.

Yang Haixi. Numerical Calculation on Electromagnetic Continuous Casting of Copper Billet[J]. Special Casting & Nonferrous Alloys, 2000,(5):51-52.
[1]杨海西,龚涛,雷作胜,邓康,任忠鸣.铜电磁连铸的数值计算[J].特种铸造及有色合金,2000(05):51-52+0. DOI： 10.15980/j.tzzz.2000.05.022.

Yang Haixi. Numerical Calculation on Electromagnetic Continuous Casting of Copper Billet[J]. Special Casting & Nonferrous Alloys, 2000,(5):51-52. DOI： 10.15980/j.tzzz.2000.05.022.

摘要

为了研制高致密度铜坯

应用电磁连铸工艺于铜圆坯连铸

探索电磁连铸技术在铜连铸上的可行性。通过改变电流和频率

以便找出其对磁场分布的影响。对空载下圆坯结晶器内的磁场进行了测量和分析

并由此得到了源电流对磁场分布的影响。同时采用有限元法ANSYS商业软件求解

为进一步开展研究建立了一定的基础

Abstract

To develop copper billet with high compactness

electromagnetic continuous casting process is applied to copper billet. The feasibility on electromagnetic continuous casting technology for copper billet is studied. The influence of current and frequency on the magnetic field distribution is studied. Magnetic field in crystallizer during idling operation is measured and analyzed. The influence of exciting current on the magnetic field distribution is obtained.The mathematical model is established by finite element method using ANSYS commercial software for further research.