挤压铸造舵面的成型规律与参数

胡建华; 罗继相

doi:10.15980/j.tzzz.2000.04.007

浏览量 : 0 下载量: 41 CSCD: 1

导出
分享
收藏
专辑

挤压铸造舵面的成型规律与参数
Forming Regulation and Technology Parameters for Rudder in Squeezing Casting
2000年第4期页码：19-21
纸质出版日期： 2000 ，
DOI： 10.15980/j.tzzz.2000.04.007

扫描看全文

[1]胡建华,罗继相.挤压铸造舵面的成型规律与参数[J].特种铸造及有色合金,2000(04):19-21+2.

Hu Jianhua. Forming Regulation and Technology Parameters for Rudder in Squeezing Casting[J]. Special Casting & Nonferrous Alloys, 2000,(4):19-21.
[1]胡建华,罗继相.挤压铸造舵面的成型规律与参数[J].特种铸造及有色合金,2000(04):19-21+2. DOI： 10.15980/j.tzzz.2000.04.007.

Hu Jianhua. Forming Regulation and Technology Parameters for Rudder in Squeezing Casting[J]. Special Casting & Nonferrous Alloys, 2000,(4):19-21. DOI： 10.15980/j.tzzz.2000.04.007.

摘要

研究了舵面的间接正挤压铸造工艺 ;分析了成型时的金属液流动规律

探讨了各压力阶段对成型性能的影响

给定了合理的挤压铸造工艺参数。

Abstract

The technology in squeezing casting with indirect right direction squeezing for rudder is studied. The forming regulation during molten metal flowing in mold and influence of individual pressure stage on forming performance are analyzed. Some reasonable technological parameters for squeezing casting are given