添加元素及工艺方法对Cu-Cu<sub>3</sub>P合金组织性能的影响

刘永涛; 李宝绵; 李英龙; 戴恩泰

doi:10.15980/j.tzzz.2000.03.005

浏览量 : 0 下载量: 54 CSCD: 1

导出
分享
收藏
专辑

添加元素及工艺方法对Cu-Cu₃P合金组织性能的影响
Influence of Micro-alloying Elements Addition and Technology on Microstructure and properties of Cu-Cu₃P Alloy
2000年第3期页码：13-15
纸质出版日期： 2000 ，
DOI： 10.15980/j.tzzz.2000.03.005

扫描看全文

[1]刘永涛,李宝绵,李英龙,戴恩泰.添加元素及工艺方法对Cu-Cu_3P合金组织性能的影响[J].特种铸造及有色合金,2000(03):13-15+2.

Liu Yongtao. Influence of Micro-alloying Elements Addition and Technology on Microstructure and properties of Cu-Cu₃P Alloy[J]. Special Casting & Nonferrous Alloys, 2000,(3):13-15.
[1]刘永涛,李宝绵,李英龙,戴恩泰.添加元素及工艺方法对Cu-Cu_3P合金组织性能的影响[J].特种铸造及有色合金,2000(03):13-15+2. DOI： 10.15980/j.tzzz.2000.03.005.

Liu Yongtao. Influence of Micro-alloying Elements Addition and Technology on Microstructure and properties of Cu-Cu₃P Alloy[J]. Special Casting & Nonferrous Alloys, 2000,(3):13-15. DOI： 10.15980/j.tzzz.2000.03.005.

摘要

研究了在Cu Cu3 P合金中加入少量添加元素及用不同的工艺手段对合金组织和性能的影响。研究发现除Ag能提高强度降低脆性

Sb能使Cu3 P球化

提高强度外

用工艺细化的手段也能显著地使Cu3 P球化

提高合金的强度和降低脆性。超声波振动可使Cu3 P球化但对组织的细化无明显作用。

Abstract

Influence of different processes and micro-alloying elements addition on structure and properties of Cu-Cu\-3P alloy is investigated. The results show that not only both Ag increases strength and decreases brittleness and Sb nodularizes Cu\-3P with strength increase

but also refinement process significantly nodularizes Cu 3P with strength increase and brittleness decrease. Ultrasonic oscillation can nodularize Cu 3P with little effects on microstructure refinement.

关键词

钎焊料细化工艺Cu-Cu3P合金

Keywords

Brazing MaterialRefinement TechnologyCu-Cu\-3P Alloy

references

文章被引用时，请邮件提醒。

提交

暂无数据

添加元素及工艺方法对Cu-Cu3P合金组织性能的影响

Influence of Micro-alloying Elements Addition and Technology on Microstructure and properties of Cu-Cu3P Alloy

DOI： 10.15980/j.tzzz.2000.03.005

摘要

Abstract

关键词

Keywords

references

添加元素及工艺方法对Cu-Cu₃P合金组织性能的影响

Influence of Micro-alloying Elements Addition and Technology on Microstructure and properties of Cu-Cu₃P Alloy