半固态连铸过程拉漏(断)机理研究

邢书明; 李亚敏; 马静; 陈维视; 翟启杰; 胡汉起; 杨秀斌; 杨日增; 贺丽荣; 杨天增

doi:10.15980/j.tzzz.2000.01.006

浏览量 : 0 下载量: 81 CSCD: 5

导出
分享
收藏
专辑

半固态连铸过程拉漏(断)机理研究
Study on Mechanism of Breakout and Breakage in Semisolid Metal Continuous Casting Process
2000年第1期页码：16-19
纸质出版日期： 2000 ，
DOI： 10.15980/j.tzzz.2000.01.006

扫描看全文

[1]邢书明,李亚敏,马静,陈维视,翟启杰,胡汉起,杨秀斌,杨日增,贺丽荣,杨天增.半固态连铸过程拉漏(断)机理研究[J].特种铸造及有色合金,2000(01):16-19.

Study on Mechanism of Breakout and Breakage in Semisolid Metal Continuous Casting Process[J]. Special Casting & Nonferrous Alloys, 2000,(1):16-19.
[1]邢书明,李亚敏,马静,陈维视,翟启杰,胡汉起,杨秀斌,杨日增,贺丽荣,杨天增.半固态连铸过程拉漏(断)机理研究[J].特种铸造及有色合金,2000(01):16-19. DOI： 10.15980/j.tzzz.2000.01.006.

Study on Mechanism of Breakout and Breakage in Semisolid Metal Continuous Casting Process[J]. Special Casting & Nonferrous Alloys, 2000,(1):16-19. DOI： 10.15980/j.tzzz.2000.01.006.

摘要

利用自行设计制造的半固态连铸机对Ｆｅ－Ｃｒ－Ｃ系及Ｆｅ－Ｍｎ－Ｃ系合金进行了半固态连铸试验。着重研究了工艺参数对拉漏及拉断现象的影响，探讨了拉漏拉断的条件及机理，提出了防止拉漏拉断的技术途径。

Abstract

A series of continuous casting tests for Fe-Cr-C white cast iron and Fe-Mn-C high manganese steel were carried out with a self-made semisolid metal continuous casting machine. Based on the result

influence of process parameters on the breakout or breakage was studied. The condition and mechanism of breakout or breakage was discussed. The technical methods to prevent this defects were offered.