熔模铸件缩松缺陷原因分析及解决方案

苏连升

doi:10.15980/j.tzzz.2022.10.023

应用·精密铸造 | 浏览量 : 0 下载量: 28 CSCD: 0

PDF
导出
分享
收藏
专辑

熔模铸件缩松缺陷原因分析及解决方案
Analysis and Solution of Shrinkage Porosities Defects in Investment Castings
2022年42卷第10期页码：1309-1312
纸质出版日期： 2022 ，
DOI： 10.15980/j.tzzz.2022.10.023

扫描看全文

苏连升. 熔模铸件缩松缺陷原因分析及解决方案[J]. 特种铸造及有色合金, 2022,42(10):1309-1312.

Su Liansheng. Analysis and Solution of Shrinkage Porosities Defects in Investment Castings[J]. Special Casting & Nonferrous Alloys, 2022,42(10):1309-1312.
苏连升. 熔模铸件缩松缺陷原因分析及解决方案[J]. 特种铸造及有色合金, 2022,42(10):1309-1312. DOI： 10.15980/j.tzzz.2022.10.023.

Su Liansheng. Analysis and Solution of Shrinkage Porosities Defects in Investment Castings[J]. Special Casting & Nonferrous Alloys, 2022,42(10):1309-1312. DOI： 10.15980/j.tzzz.2022.10.023.

摘要

缩松缺陷是熔模铸造中常出现的问题，其原因是热节部位得不到补缩，因此使铸件热节部位得到充分的补缩就能有效解决缩松缺陷，一般通过增加钢水补缩量、打通补缩通道、改善散热条件等。就实际生产中常见的缩松产生原因及其解决方案进行阐述。

Abstract

Shrinkage porosity defects easily occurrs in investment casting

which is attrisuted to the adequate feeding for the hot spot. Investment casting shrinkage porosities sol silicate. Hot spot so shrinkage porosities can be eliminated effectively by the effectiv feeding

including adding liquid steel feeding

opening up the shrinkage channel

and improving the heat dissipation condition

etc. The causes and solutions of shrinkage in practical production were expounded.