中大型钢锭电渣冶金制备技术研究进展

赵黎廷; 陈瑞; 高云保; 韩智; 李瑞新; 李景明; 温秋林

doi:10.15980/j.tzzz.2022.10.005

研究·论述 | 浏览量 : 0 下载量: 39 CSCD: 0

PDF
导出
分享
收藏
专辑

中大型钢锭电渣冶金制备技术研究进展
Research Progress in Electroslag Metallurgical Preparation Technology for Middle and Large Steel Ingots
2022年42卷第10期页码：1215-1219
纸质出版日期： 2022 ，
DOI： 10.15980/j.tzzz.2022.10.005

扫描看全文

赵黎廷, 陈瑞, 高云保, 等. 中大型钢锭电渣冶金制备技术研究进展[J]. 特种铸造及有色合金, 2022,42(10):1215-1219.

Zhao Liting, Chen Rui, Gao Yunbao, et al. Research Progress in Electroslag Metallurgical Preparation Technology for Middle and Large Steel Ingots[J]. Special Casting & Nonferrous Alloys, 2022,42(10):1215-1219.
赵黎廷, 陈瑞, 高云保, 等. 中大型钢锭电渣冶金制备技术研究进展[J]. 特种铸造及有色合金, 2022,42(10):1215-1219. DOI： 10.15980/j.tzzz.2022.10.005.

Zhao Liting, Chen Rui, Gao Yunbao, et al. Research Progress in Electroslag Metallurgical Preparation Technology for Middle and Large Steel Ingots[J]. Special Casting & Nonferrous Alloys, 2022,42(10):1215-1219. DOI： 10.15980/j.tzzz.2022.10.005.

摘要

由于电渣重熔法具有金属纯净、组织致密、铸锭表面光洁等特点，针对条件要求苛刻的中大型钢锭已广泛采用电渣重熔及其衍生技术进行生产。对电渣重熔技术、液态电渣技术、双回路电渣重熔技术、电渣熔焊技术4项中大型钢锭生产技术的原理及研究进展进行介绍和评价。随着电渣复合概念的普及，提出采用电渣铸焊技术生产中大型钢锭，并对其技术优势进行阐述。

Abstract

Electroslag remelting method has the characteristics of pure metal

dense structure

and smooth surface

which is widely used to produce large steel ingots with demanding conditions combined with its derivative technologies. The principles and research progress of four kinds of large-scale steel ingot production technologies were reviewed

including electroslag remelting technology

liquid-metal electroslag technology

double-circuit electroslag remelting

and electroslag remelting-welding technology. With the popularization of the electroslag composite concept

the electroslag welding technology was proposed to produce large-scale steel ingots

and technical advantages were expounded.