铸造金属型模具水冷快速设计方法

陈思源; 赵国平

doi:10.15980/j.tzzz.2022.04.006

研究·计算机应用 | 浏览量 : 0 下载量: 59 CSCD: 0

PDF
导出
分享
收藏
专辑

铸造金属型模具水冷快速设计方法
Quick Design of Permanent Mold Water Cooling
2022年42卷第4期页码：424-427
纸质出版日期： 2022 ，
DOI： 10.15980/j.tzzz.2022.04.006

扫描看全文

陈思源, 赵国平. 铸造金属型模具水冷快速设计方法[J]. 特种铸造及有色合金, 2022,42(4):424-427.

Chen Siyuan, Zhao Guoping. Quick Design of Permanent Mold Water Cooling[J]. Special Casting & Nonferrous Alloys, 2022,42(4):424-427.
陈思源, 赵国平. 铸造金属型模具水冷快速设计方法[J]. 特种铸造及有色合金, 2022,42(4):424-427. DOI： 10.15980/j.tzzz.2022.04.006.

Chen Siyuan, Zhao Guoping. Quick Design of Permanent Mold Water Cooling[J]. Special Casting & Nonferrous Alloys, 2022,42(4):424-427. DOI： 10.15980/j.tzzz.2022.04.006.

摘要

通过水冷过程的热力学计算分析，借助ProCAST软件对实际铸造金属型模具温度进行多道次热循环模拟分析，提出了一种模具冷却水量的快捷计算方法。该水冷设计方法可为使用金属型模具的铸造工艺快速达到热平衡温度场提供参考。

Abstract

A quick calculation equation of permanent mold cooling water volume was proposed through thermodynamic calculation and a casting simulation software for multiple cycle simulation analysis on temperature of the casting mold. The water-cooling design method can provide a theoretical reference for fast reaching heat balanced temperature field of casting process by permanent mold.