基于DLP-3D打印的闭式叶轮熔模快速铸造技术研究

朱雪明; 童幸生; 王凤华

doi:10.15980/j.tzzz.2021.11.010

研究·增材制造 | 浏览量 : 0 下载量: 109 CSCD: 0

PDF
导出
分享
收藏
专辑

基于DLP-3D打印的闭式叶轮熔模快速铸造技术研究
Rapid Investment Casting Technology of Closed Impeller Based on Digital Light Processing （DLP） 3D Printing
2021年41卷第11期页码：1370-1374
纸质出版日期： 2021 ，
DOI： 10.15980/j.tzzz.2021.11.010

扫描看全文

朱雪明, 童幸生, 王凤华. 基于DLP-3D打印的闭式叶轮熔模快速铸造技术研究[J]. 特种铸造及有色合金杂志, 2021,41(11):1370-1374.

Zhu Xueming, Tong Xingsheng, Wang Fenghua. Rapid Investment Casting Technology of Closed Impeller Based on Digital Light Processing （DLP） 3D Printing[J]. Special Casting & Nonferrous Alloys, 2021,41(11):1370-1374.
朱雪明, 童幸生, 王凤华. 基于DLP-3D打印的闭式叶轮熔模快速铸造技术研究[J]. 特种铸造及有色合金杂志, 2021,41(11):1370-1374. DOI： 10.15980/j.tzzz.2021.11.010.

Zhu Xueming, Tong Xingsheng, Wang Fenghua. Rapid Investment Casting Technology of Closed Impeller Based on Digital Light Processing （DLP） 3D Printing[J]. Special Casting & Nonferrous Alloys, 2021,41(11):1370-1374. DOI： 10.15980/j.tzzz.2021.11.010.

摘要

针对复杂铸件蜡模制作难度大、加工周期长等问题

将数字光处理(DLP)3D打印技术与传统熔模铸造相结合

以内部结构复杂的闭式叶轮作为试验对象。使用DLP技术一次打印完成了叶轮铸型及浇注系统蜡模

制作成本仅为传统工艺的几十分之一。并通过型壳制作、焙烧脱蜡及浇注等工序获得了叶轮铸件。经检测

使用DLP技术制成的叶轮铸件无铸造缺陷

表面品质符合要求。

Abstract

Aiming at the high difficulty and long cycles for wax pattern of complex casting

the DLP（digital light processing） 3 D printing technology was combined with traditional investment casting to produce the closed impeller with complex internal structure. The casting mold of impeller and the wax pattern of gating system were printed by DLP technology at one time

with a lower cost than that of the traditional process. The impeller casting products were obtained by making mold shell

dewaxing

baking and pouring. The results indicate that the surface quality of impeller casting products made by DLP technology meets the requirements without casting defects.