3D打印技术在钛合金构件生产中的应用

李渤渤; 田永武; 温方明; 乔海滨; 刘茵琪

doi:10.15980/j.tzzz.2021.09.017

研究·增材制造 | 浏览量 : 0 下载量: 142 CSCD: 0

PDF
导出
分享
收藏
专辑

3D打印技术在钛合金构件生产中的应用
Application of 3D Printing Technology in Titanium Alloy Casting Production
2021年41卷第9期页码：1144-1147
纸质出版日期： 2021 ，
DOI： 10.15980/j.tzzz.2021.09.017

扫描看全文

李渤渤, 田永武, 温方明, 等. 3D打印技术在钛合金构件生产中的应用[J]. 特种铸造及有色合金杂志, 2021,41(9):1144-1147.

Li Bobo, Tian Yongwu, Wen Fangming, et al. Application of 3D Printing Technology in Titanium Alloy Casting Production[J]. Special Casting & Nonferrous Alloys, 2021,41(9):1144-1147.
李渤渤, 田永武, 温方明, 等. 3D打印技术在钛合金构件生产中的应用[J]. 特种铸造及有色合金杂志, 2021,41(9):1144-1147. DOI： 10.15980/j.tzzz.2021.09.017.

Li Bobo, Tian Yongwu, Wen Fangming, et al. Application of 3D Printing Technology in Titanium Alloy Casting Production[J]. Special Casting & Nonferrous Alloys, 2021,41(9):1144-1147. DOI： 10.15980/j.tzzz.2021.09.017.

摘要

3D打印钛合金适合于制备复杂形状构件

可减少生产工序

并提高材料利用率。近年来

为制备结构更为复杂的钛合金结构件

同时进一步降低成本

并缩短生产周期

3D打印增材制造技术在钛合金构件生产中获得快速发展。系统介绍了3D打印技术在钛合金铸件生产中的应用优势、分类及工艺特点、现状及发展方向。

Abstract

3 D printing titanium alloy is suitable for manufacturing complex shape components

which can reduce production process and improve material utilization. In recent years

the application of 3 D printing additive manufacturing technology in the production of titanium alloy components achieves rapid development and significant advantages in order to obtain the more complex structure of titanium alloy components

and further reduce the cost and shorten the production cycle. The application advantages

characteristics of classification and process

status and development direction of 3 D printing technology in titanium alloy casting production were systematically introduced.