English Version
研究·合金性能 | 浏览量 : 41 下载量: 141 CSCD: 0
  • 导出

  • 分享

  • 收藏

  • 专辑

    • 退火温度对5154铝合金铆钉线力学性能的影响

    • Effects of Annealing Temperature on Mechanical Properties of 5154 Alloy for Rivet Wire

    • 张桓

      1

      贾伟

      1

      赵立洋

      1

      章安楠

      1

      段妍彤

      1

      乔恒

      1

      韦振翔

      1
    • 2021年41卷第8期 页码:979-981   

      纸质出版日期: 2021

    • DOI: 10.15980/j.tzzz.2021.08.010     

    扫 描 看 全 文

  • 引用

    阅读全文PDF

  • 张桓, 贾伟, 赵立洋, 等. 退火温度对5154铝合金铆钉线力学性能的影响[J]. 特种铸造及有色合金杂志, 2021,41(8):979-981. DOI: 10.15980/j.tzzz.2021.08.010.
    Zhang Huan, Jia Wei, Zhao Liyang, et al. Effects of Annealing Temperature on Mechanical Properties of 5154 Alloy for Rivet Wire[J]. Special Casting & Nonferrous Alloys, 2021,41(8):979-981. DOI: 10.15980/j.tzzz.2021.08.010.
  •  
  •  
    论文导航

    摘要

    通过连铸连轧-拉拔-中间退火-拉拔法制备了5154铝合金铆钉线。采用力学性能测试、显微组织观察等方法分析了退火后铆钉线的力学性能和微观组织。结果表明,当退火温度为460℃时,5154铝合金铆钉线的力学性能理想,这与材料中的第二相变化以及晶粒的大小有关。

    Abstract

    5154 aluminum alloy for rivet wire was fabricated by continuous casting and rolling-drawing-intermediate annealing-drawing. The mechanical properties and microstructure of the annealed rivet wire were analyzed by means of tensile testing and SEM observation. The results reveal that the mechanical properties of 5154 alloy for rivet wire are desirable with the annealing temperature of 460 ℃, which is related with the transformation of the second phase and the grain size.

    关键词

    5154铝合金; 力学性能; 第二相; 微观组织

    Keywords

    5154 Aluminum Alloy; Mechanical Properties; Second Phase; Microstructure

    文章被引用时,请邮件提醒。
    提交

    相关作者

    马振星 太原理工大学材料科学与工程学院
    游志勇 太原理工大学材料科学与工程学院
    蒋傲雪 太原理工大学材料科学与工程学院
    于杰 太原理工大学材料科学与工程学院
    王彬 太原理工大学材料科学与工程学院
    伍德超 合肥工业大学材料科学与工程学院;高性能铜合金材料及成形教育部工程研究中心
    方晓刚 合肥工业大学材料科学与工程学院;高性能铜合金材料及成形教育部工程研究中心;华中科技大学材料成形与模具技术全国重点实验室
    张天阳 合肥工业大学材料科学与工程学院;高性能铜合金材料及成形教育部工程研究中心

    相关机构

    太原理工大学材料科学与工程学院
    合肥工业大学材料科学与工程学院
    高性能铜合金材料及成形教育部工程研究中心
    华中科技大学材料成形与模具技术全国重点实验室
    芜湖瑞鹄汽车轻量化技术有限公司
    0