基于云计算的路由器盒盖半固态压铸工艺设计及优化

龙文元; 宋国金

doi:10.15980/j.tzzz.2021.05.024

应用·压力铸造 | 浏览量 : 0 下载量: 46 CSCD: 0

PDF
导出
分享
收藏
专辑

基于云计算的路由器盒盖半固态压铸工艺设计及优化
Process Design and Optimization of Semi-solid Die-casting of Box Lid Based on Cloud Computing Router
2021年41卷第5期页码：638-640
纸质出版日期： 2021 ，
DOI： 10.15980/j.tzzz.2021.05.024

扫描看全文

龙文元, 宋国金. 基于云计算的路由器盒盖半固态压铸工艺设计及优化[J]. 特种铸造及有色合金杂志, 2021,41(5):638-640.

Long Wenyuan, Gong Jie. Process Design and Optimization of Semi-solid Die-casting of Box Lid Based on Cloud Computing Router[J]. Special Casting & Nonferrous Alloys, 2021,41(5):638-640.
龙文元, 宋国金. 基于云计算的路由器盒盖半固态压铸工艺设计及优化[J]. 特种铸造及有色合金杂志, 2021,41(5):638-640. DOI： 10.15980/j.tzzz.2021.05.024.

Long Wenyuan, Gong Jie. Process Design and Optimization of Semi-solid Die-casting of Box Lid Based on Cloud Computing Router[J]. Special Casting & Nonferrous Alloys, 2021,41(5):638-640. DOI： 10.15980/j.tzzz.2021.05.024.

摘要

对5G无线路由器盒盖的半固态压铸工艺和模具进行了设计

利用智铸超云CAE云平台对其半固态流变压铸充型过程进行了数值模拟

优选了压铸工艺方案进行生产试验。结果表明

利用云计算进行数值模拟能为工艺方案的评价和改进提供参考

能缩短新产品的开发周期。根据优化方案设计制造了路由器盒盖压铸模具

采用半固态压铸工艺生产出了合格的路由器盒盖压铸件

压铸件无缩松、气孔等缺陷。

Abstract

The semi-solid die-casting process and die of 5 G wireless router box cover were designed. The semi-solid rheological die-casting filling process was simulated by using the CAE cloud platform. An optimal die-casting process was selected for the production test. The results indicate that numerical simulation carried out by cloud computing can provide a scientific basis for the evaluation and improvement of process scheme

shortening the development cycle of new products. The die casting mould of router box cover was designed and manufactured according to the simulation and optimization process

and qualified die casting parts of router box cover without shrinkage and porosity were produced by using semi-solid die casting process.