基于温度场模拟的大型液芯钢锭制备研究

吴永强; 王开坤

doi:10.15980/j.tzzz.2021.04.008

研究·计算机应用 | 浏览量 : 0 下载量: 7 CSCD: 0

PDF
导出
分享
收藏
专辑

基于温度场模拟的大型液芯钢锭制备研究
Preparation of Large-scale Liquid Core Ingot Based on the Simulation of Temperature Field
2021年41卷第4期页码：429-433
纸质出版日期： 2021 ，
DOI： 10.15980/j.tzzz.2021.04.008

扫描看全文

[1]吴永强,王开坤.基于温度场模拟的大型液芯钢锭制备研究[J].特种铸造及有色合金,2021,41(04):429-433.

Wu Yongqiang, Wang Kaikun. Preparation of Large-scale Liquid Core Ingot Based on the Simulation of Temperature Field[J]. Special Casting & Nonferrous Alloys, 2021,41(4):429-433.
[1]吴永强,王开坤.基于温度场模拟的大型液芯钢锭制备研究[J].特种铸造及有色合金,2021,41(04):429-433. DOI： 10.15980/j.tzzz.2021.04.008.

Wu Yongqiang, Wang Kaikun. Preparation of Large-scale Liquid Core Ingot Based on the Simulation of Temperature Field[J]. Special Casting & Nonferrous Alloys, 2021,41(4):429-433. DOI： 10.15980/j.tzzz.2021.04.008.

摘要

在Deform-3D模拟软件中建立了钢锭带模凝固、超高温脱模过程的有限元模型

基于对凝固过程的模拟

分析了含有一定液芯率的钢锭。通过模拟得到了不同尺寸下锭型温度场的分布

其中固相区、液相区、固液两相区的大小区分以材料的固、液相线温度来确定。通过分析固相区、液相区、固液两相区的位置和大小

揭示了不同尺寸钢锭模对液芯大小和位置的影响。基于液芯钢锭凝固过程模拟分析

设计了一系列新的钢锭模

可为实际生产提供参考。

Abstract

The finite element models including solidification with mold and ultra-high temperature demoulding were established in DEFORM-3D simulation software.Ingots with a certain liquid core were prepared and analyzed based on the simulation of the solidification process.The distributions of the temperature field under various ingot molds were presented

where the solidus and liquidus temperature of the material were used to distinguish the dimension of the solid-phase region

the liquid-phase region and the solid-liquid two-phase region.The influence law of different ingot molds on the position and the dimension of those regions was revealed.Moreover

a series of new ingot molds were designed based on the simulation analysis of solidification process of liquid core ingot

providing theoretical reference for practical production.