交流电流与间歇性通电对铜铝复合板腐蚀行为的影响

程禹霖; 黄宏军; 左晓姣; 袁晓光; 张艺凡

doi:10.15980/j.tzzz.2021.03.011

研究·复合材料 | 浏览量 : 0 下载量: 10 CSCD: 0

PDF
导出
分享
收藏
专辑

交流电流与间歇性通电对铜铝复合板腐蚀行为的影响
Effects of AC Current and Intermittent Current on Corrosion Behavior of Copper-aluminum Composite Plate
2021年41卷第3期页码：317-320
纸质出版日期： 2021 ，
DOI： 10.15980/j.tzzz.2021.03.011

扫描看全文

[1]程禹霖,黄宏军,左晓姣,袁晓光,张艺凡.交流电流与间歇性通电对铜铝复合板腐蚀行为的影响[J].特种铸造及有色合金,2021,41(03):317-320.

Cheng Yulin, Huang Hongjun, Zuo Xiaojiao, et al. Effects of AC Current and Intermittent Current on Corrosion Behavior of Copper-aluminum Composite Plate[J]. Special Casting & Nonferrous Alloys, 2021,41(3):317-320.
[1]程禹霖,黄宏军,左晓姣,袁晓光,张艺凡.交流电流与间歇性通电对铜铝复合板腐蚀行为的影响[J].特种铸造及有色合金,2021,41(03):317-320. DOI： 10.15980/j.tzzz.2021.03.011.

Cheng Yulin, Huang Hongjun, Zuo Xiaojiao, et al. Effects of AC Current and Intermittent Current on Corrosion Behavior of Copper-aluminum Composite Plate[J]. Special Casting & Nonferrous Alloys, 2021,41(3):317-320. DOI： 10.15980/j.tzzz.2021.03.011.

摘要

研究了铜铝复合材料在质量分数为5%的NaCl中性盐雾中进行间歇性通电时的加速腐蚀过程

通过失重分析法、SEM、EDS、XRD以及电化学检测法分析了铜铝复合板的腐蚀机制与电流影响机制。结果表明

铜铝复合板界面处发生电偶腐蚀倾向比远离界面处铝基体更严重

在0～50A范围内

电流对复合板起到加速腐蚀作用

电流越大

加速作用越明显。相比于全程通电的试样

在25A电流下作用48h内

间歇性通电的试样腐蚀更严重。

Abstract

5%concentration neutral salt spray accelerated corrosion experiments were carried out on copper aluminum composite plate in intermittent energized state.The corrosion mechanism and current influence mechanism of composite plate were analyzed by weight loss analysis

SEM

EDS

XRD and electrochemical detection.The results indicate that the galvanic corrosion tendency at the interface of copper-aluminum composite plate presents more serious than that of aluminum matrix far away from the interface.In 0～50 A

the current can accelerate the corrosion

and the higher the current is

the more significant the acceleration is.The intermittently energized specimens are corroded more severely than the entirely energized ones under 25 Acurrent within 48 h.