大型复杂圆台型钛合金铸件的铸造工艺研究

范李鹏; 王宝兵; 姬艳硕; 冯港雯; 徐信锋; 谢剑锋; 杨剑

doi:10.15980/j.tzzz.2021.02.011

English Version

研究·合金工艺 | 浏览量 : 39 下载量: 145 CSCD: 0

PDF
导出
分享给微信好友或者朋友圈

分享
收藏
专辑

大型复杂圆台型钛合金铸件的铸造工艺研究
Research on Casting Process of Large and Complex Titanium Alloy Castings with the Round Table Type
- 角色： First author 第一作者
- 机构：
  上海航天精密机械研究所
范李鹏
1 ，
- 机构：
  上海航天精密机械研究所
  上海交通大学材料科学与工程学院
王宝兵
1 2 ，
- 机构：
  上海航天精密机械研究所
姬艳硕
1 ，
- 机构：
  上海航天精密机械研究所
冯港雯
1 ，
- 机构：
  上海航天精密机械研究所
徐信锋
1 ，
- 机构：
  上海航天精密机械研究所
谢剑锋
1 ，
- 机构：
  上海航天精密机械研究所
杨剑
1
2021年41卷第2期页码：182-184
纸质出版日期： 2021 ，
DOI： 10.15980/j.tzzz.2021.02.011

扫描看全文

引用

阅读全文PDF
[1]范李鹏,王宝兵,姬艳硕,冯港雯,徐信锋,谢剑锋,杨剑.大型复杂圆台型钛合金铸件的铸造工艺研究[J].特种铸造及有色合金,2021,41(02):182-184.

Fan Lipeng, Wang Baobing, Ji Yanshuo, et al. Research on Casting Process of Large and Complex Titanium Alloy Castings with the Round Table Type[J]. Special Casting & Nonferrous Alloys, 2021,41(2):182-184.
[1]范李鹏,王宝兵,姬艳硕,冯港雯,徐信锋,谢剑锋,杨剑.大型复杂圆台型钛合金铸件的铸造工艺研究[J].特种铸造及有色合金,2021,41(02):182-184. DOI： 10.15980/j.tzzz.2021.02.011.

Fan Lipeng, Wang Baobing, Ji Yanshuo, et al. Research on Casting Process of Large and Complex Titanium Alloy Castings with the Round Table Type[J]. Special Casting & Nonferrous Alloys, 2021,41(2):182-184. DOI： 10.15980/j.tzzz.2021.02.011.

大型复杂圆台型钛合金铸件的铸造工艺研究

范李鹏 ; 王宝兵 ; 姬艳硕 ; 冯港雯 ; 徐信锋 ; 谢剑锋 ; 杨剑 ;

PDF下载

摘要

针对某大型复杂圆台型钛合金铸件结构特点,设计了两种铸造工艺,并结合模拟仿真对铸造工艺进行优化,其中直立底注式铸造工艺更优。采用石墨型铸造并进行了生产验证,得到品质满足GJB2896A-2007中I类高品质铸件要求。

译

Abstract

According to the structural characteristics of large and complex round-table titanium alloy castings,two kinds of casting processes were designed to optimize the casting process combined with simulation,of which the vertical bottom injection process was the satisfactory.Graphite mold casting process was used for production verification,and high-quality castings were obtained,of which the size structure,surface quality and internal quality all meet the requirements of Class I in GJB2896 A-2007.

译

关键词

钛合金; 大型复杂结构; 石墨型; 铸造工艺

译

Keywords

Titanium Alloy; Large Complex Structure; Graphite Mould; Casting Process

译

摘要

针对某大型复杂圆台型钛合金铸件结构特点

设计了两种铸造工艺

并结合模拟仿真对铸造工艺进行优化

其中直立底注式铸造工艺更优。采用石墨型铸造并进行了生产验证

得到品质满足GJB2896A-2007中I类高品质铸件要求。

Abstract

According to the structural characteristics of large and complex round-table titanium alloy castings

two kinds of casting processes were designed to optimize the casting process combined with simulation

of which the vertical bottom injection process was the satisfactory.Graphite mold casting process was used for production verification

and high-quality castings were obtained

of which the size structure

surface quality and internal quality all meet the requirements of Class I in GJB2896 A-2007.

关键词

钛合金大型复杂结构石墨型铸造工艺

Keywords

Titanium AlloyLarge Complex StructureGraphite MouldCasting Process

references

文章被引用时，请邮件提醒。

提交