半连续铸造铝合金表面缺陷的形成机理及影响因素

李志猛; 左玉波; 朱庆丰; 王睿; 刘旭东

doi:10.15980/j.tzzz.2021.01.022

研究·合金工艺 | 浏览量 : 0 下载量: 74 CSCD: 0

PDF
导出
分享
收藏
专辑

半连续铸造铝合金表面缺陷的形成机理及影响因素
Formation Mechanism and Influencing Factors of Surface Defects in Semi-Continuous Casting Aluminum Alloy
2021年41卷第1期页码：108-113
纸质出版日期： 2021 ，
DOI： 10.15980/j.tzzz.2021.01.022

扫描看全文

[1]李志猛,左玉波,朱庆丰,王睿,刘旭东.半连续铸造铝合金表面缺陷的形成机理及影响因素[J].特种铸造及有色合金,2021,41(01):108-113.

Li Zhimeng, Zuo Yubo, Zhu Qingfeng, et al. Formation Mechanism and Influencing Factors of Surface Defects in Semi-Continuous Casting Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2021,41(1):108-113.
[1]李志猛,左玉波,朱庆丰,王睿,刘旭东.半连续铸造铝合金表面缺陷的形成机理及影响因素[J].特种铸造及有色合金,2021,41(01):108-113. DOI： 10.15980/j.tzzz.2021.01.022.

Li Zhimeng, Zuo Yubo, Zhu Qingfeng, et al. Formation Mechanism and Influencing Factors of Surface Defects in Semi-Continuous Casting Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2021,41(1):108-113. DOI： 10.15980/j.tzzz.2021.01.022.

摘要

介绍了半连续铸造铝合金锭坯冷隔、皮下偏析层、表面偏析瘤、拉痕等表面缺陷的特点和形成机制。分析了在半连续铸造铝合金锭坯过程中结晶器结构、铸造工艺参数对这些表面缺陷的影响及作用机理。在此基础上总结了提高铸锭表面品质的技术发展和工艺优化方向。

Abstract

The characteristics and formation mechanism of surface defects such as cold shut

surface segregation layer

surface segregation burl and pull marks in semi-continuous casting aluminum alloy ingot were introduced.The effects of mold structure and casting process parameters on the surface defects during semi-continuous casting were analyzed.On this basis

the technical development and process optimization directions to improve ingot surface quality were presented.