焊接速度对GH3039/IC10电子束焊接头组织和性能的影响

孙文君; 王善林; 张子阳; 洪敏; 吴鸣; 陈玉华; 柯黎明

doi:10.15980/j.tzzz.2020.11.022

特种合金 | 浏览量 : 0 下载量: 42 CSCD: 0

导出
分享
收藏
专辑

焊接速度对GH3039/IC10电子束焊接头组织和性能的影响
Effects of Different Welding Speeds on Microstructure and Mechanical Properties of GH3039/IC10 Electron Beam Welded Joints
2020年40卷第11期页码：1274-1279
纸质出版日期： 2020 ，
DOI： 10.15980/j.tzzz.2020.11.022

扫描看全文

[1]孙文君,王善林,张子阳,洪敏,吴鸣,陈玉华,柯黎明.焊接速度对GH3039/IC10电子束焊接头组织和性能的影响[J].特种铸造及有色合金,2020,40(11):1274-1279.

Sun Wenjun, Wang Shanlin, Zhang Ziyang, et al. Effects of Different Welding Speeds on Microstructure and Mechanical Properties of GH3039/IC10 Electron Beam Welded Joints[J]. Special Casting & Nonferrous Alloys, 2020,40(11):1274-1279.
[1]孙文君,王善林,张子阳,洪敏,吴鸣,陈玉华,柯黎明.焊接速度对GH3039/IC10电子束焊接头组织和性能的影响[J].特种铸造及有色合金,2020,40(11):1274-1279. DOI： 10.15980/j.tzzz.2020.11.022.

Sun Wenjun, Wang Shanlin, Zhang Ziyang, et al. Effects of Different Welding Speeds on Microstructure and Mechanical Properties of GH3039/IC10 Electron Beam Welded Joints[J]. Special Casting & Nonferrous Alloys, 2020,40(11):1274-1279. DOI： 10.15980/j.tzzz.2020.11.022.

摘要

IC10单晶Ni

Al基高温合金和GH3039高温合金可以采用电子束焊接技术用于整体叶盘的制造。通过改变焊接速度研究焊接参数对GH3039/IC10电子束焊接头组织与力学性能的影响

为工程实际应用提供数据参考。

Abstract

IC10 single crystal Ni

Al-based superalloy and GH3039 superalloy can be used in the manufacture of integral leaf disc by electron beam welding. The effect of welding parameters on microstructure and mechanical properties of GH3039/IC10 electron beam welded joints was investigated by changing welding speed

which provided data references for practical application of the project.