固定壳体熔模铸造工艺设计

王荣; 刘俊英; 李建彬

doi:10.15980/j.tzzz.2020.06.017

精密铸造 | 浏览量 : 0 下载量: 118 CSCD: 0

导出
分享
收藏
专辑

固定壳体熔模铸造工艺设计
Investment Casting Process Design for Intermediate Case
2020年40卷第6期页码：650-652
纸质出版日期： 2020 ，
DOI： 10.15980/j.tzzz.2020.06.017

扫描看全文

[1]王荣,刘俊英,李建彬.固定壳体熔模铸造工艺设计[J].特种铸造及有色合金,2020,40(06):650-652.

Wang Rong, Liu Junying, Li Jianbin. Investment Casting Process Design for Intermediate Case[J]. Special Casting & Nonferrous Alloys, 2020,40(6):650-652.
[1]王荣,刘俊英,李建彬.固定壳体熔模铸造工艺设计[J].特种铸造及有色合金,2020,40(06):650-652. DOI： 10.15980/j.tzzz.2020.06.017.

Wang Rong, Liu Junying, Li Jianbin. Investment Casting Process Design for Intermediate Case[J]. Special Casting & Nonferrous Alloys, 2020,40(6):650-652. DOI： 10.15980/j.tzzz.2020.06.017.

摘要

根据中介机匣结构特点及企业现有的生产条件

设计了中介机匣熔模铸造工艺及生产流程。结果表明

快速成形技术的应用

减少了模具投入成本

同时缩短了制造周期。应用分体制作型壳、组合浇注等措施

能降低设备限制影响且能降低工人劳动强度。采用捆绑铁丝、增加冷铁、型壳埋砂等措施

成功制备品质良好的铸件。

Abstract

According to the structural characteristics of the intermediate case and the production conditions of the company

the investment casting process and production flow chart for intermediate case were designed.The production results show that rapid prototyping manufacturing can reduce the cost of mould making and shorten manufacturing cycle.Separated-shell making and integrated casting can reduce the labor intensity and the impact of device limitation.Through binding iron wire

using external chill and burying the mold shell in sand box

the intermediate case was produced successfully.