基于PAGM模型的浇注系统对螺旋桨铸件夹渣率的影响

柏雪; 饶磊; 苗田雨; 游凯

doi:10.15980/j.tzzz.2020.04.009

计算机应用技术 | 浏览量 : 0 下载量: 26 CSCD: 0

导出
分享
收藏
专辑

基于PAGM模型的浇注系统对螺旋桨铸件夹渣率的影响
Influence of the Gating System on the Slag Casting Rate of Propeller Castings Based on the PAGM Model
2020年40卷第4期页码：387-391
纸质出版日期： 2020 ，
DOI： 10.15980/j.tzzz.2020.04.009

扫描看全文

[1]柏雪,饶磊,苗田雨,游凯.基于PAGM模型的浇注系统对螺旋桨铸件夹渣率的影响[J].特种铸造及有色合金,2020,40(04):387-391.

Bai Xue, Rao Lei, Miao Tianyu, et al. Influence of the Gating System on the Slag Casting Rate of Propeller Castings Based on the PAGM Model[J]. Special Casting & Nonferrous Alloys, 2020,40(4):387-391.
[1]柏雪,饶磊,苗田雨,游凯.基于PAGM模型的浇注系统对螺旋桨铸件夹渣率的影响[J].特种铸造及有色合金,2020,40(04):387-391. DOI： 10.15980/j.tzzz.2020.04.009.

Bai Xue, Rao Lei, Miao Tianyu, et al. Influence of the Gating System on the Slag Casting Rate of Propeller Castings Based on the PAGM Model[J]. Special Casting & Nonferrous Alloys, 2020,40(4):387-391. DOI： 10.15980/j.tzzz.2020.04.009.

摘要

基于分散相粒子运动模型

考虑夹渣在随流运动过程中动态聚合长大现象

构建了夹渣聚合长大模型（PAGM

Particles Aggregation Growth Model）。采用PAGM对铝合金螺旋桨铸件浇注过程中夹渣的运动轨迹、聚合长大行为及最终位置进行了模拟计算和试验验证。在此基础上研究了浇注系统对铸件夹渣分布及夹渣率的影响。结果表明

浇注系统设计对夹渣运动行为及分布有较大影响

PAGM可有效提升对铸件夹渣分布预测的准确性

为铸件优化设计及失效分析提供参考。

Abstract

Based on the dispersion phase particle motion model

considering the dynamic polymerization and particle growth of the slag particles during the flow movement

aparticles aggregation growth model（PAGM）was constructed.For the aluminum alloy propeller castings

the PAGM model was used to simulate the movement trajectory

polymerization growth behavior and final distribution position of the casting during filling and solidification process

and the experimental verification was carried out.On the basis of analysis

the influence of casting system on the slag distribution and slag inclusion rate of castings was analyzed.The results show that the design of the gating system has a great influence on the behavior and distribution of slag inclusion.PAGM can improve effectively the accuracy of casting slag distribution prediction

and provide reference for casting optimization design and failure analysis.