低压铸造铝合金副车架的数值模拟及试验验证

代后山; 董迎晖; 袁鹤中

doi:10.15980/j.tzzz.2020.03.013

压力铸造 | 浏览量 : 0 下载量: 145 CSCD: 1

导出
分享
收藏
专辑

低压铸造铝合金副车架的数值模拟及试验验证
Numerical Simulation and Experimental Verification of Low Pressure Die Casting Aluminum Alloy Sub-frame
2020年40卷第3期页码：290-293
纸质出版日期： 2020 ，
DOI： 10.15980/j.tzzz.2020.03.013

扫描看全文

[1]代后山,董迎晖,袁鹤中.低压铸造铝合金副车架的数值模拟及试验验证[J].特种铸造及有色合金,2020,40(03):290-293.

Dai Houshan, Dong Yinghui, Yuan Hezhong. Numerical Simulation and Experimental Verification of Low Pressure Die Casting Aluminum Alloy Sub-frame[J]. Special Casting & Nonferrous Alloys, 2020,40(3):290-293.
[1]代后山,董迎晖,袁鹤中.低压铸造铝合金副车架的数值模拟及试验验证[J].特种铸造及有色合金,2020,40(03):290-293. DOI： 10.15980/j.tzzz.2020.03.013.

Dai Houshan, Dong Yinghui, Yuan Hezhong. Numerical Simulation and Experimental Verification of Low Pressure Die Casting Aluminum Alloy Sub-frame[J]. Special Casting & Nonferrous Alloys, 2020,40(3):290-293. DOI： 10.15980/j.tzzz.2020.03.013.

摘要

基于CATIA软件进行副车架结构及浇道设计

并利用HyperWorks软件平台建立副车架有限元模型

分析其刚度、强度和模态

运用ProCAST软件对副车架低压铸造过程进行数值模拟

并对低压铸造生产的整体空心式铝合金副车架进行可靠耐久性验证

结果满足性能要求。

Abstract

Based on CATIA

the sub-frame structure and pouring system were designed

and the finite element model of the sub-frame was established to analyze the stiffness

strength and mode of the sub-frame.The ProCAST software was used to simulate the low-pressure casting process of the sub-frame.The reliable durability of the integral hollow aluminum alloy sub-frame produced by low pressure casting was verified.The results show that the low pressure casting sub-frame meets the performance requirements.