海绵钛/电解钛熔炼TC4钛合金铸锭直接轧制板材的组织及性能

谭聪; 余堃; 肖寒; 张宏宇; 黄海广; 李志敏; 刘昆; 周荣锋

doi:10.15980/j.tzzz.2020.01.025

轻有色合金 | 浏览量 : 0 下载量: 81 CSCD: 0

导出
分享
收藏
专辑

海绵钛/电解钛熔炼TC4钛合金铸锭直接轧制板材的组织及性能
Microstructure and Properties of Rolled TC4 Titanium Alloy Sheet with Smelting by Sponge Titanium/Electrolytic Titanium
2020年40卷第1期页码：104-107
纸质出版日期： 2020 ，
DOI： 10.15980/j.tzzz.2020.01.025

扫描看全文

[1]谭聪,余堃,肖寒,张宏宇,黄海广,李志敏,刘昆,周荣锋.海绵钛/电解钛熔炼TC4钛合金铸锭直接轧制板材的组织及性能[J].特种铸造及有色合金,2020,40(01):104-107.

Tan Cong, Yu Kun, Xiao Han, et al. Microstructure and Properties of Rolled TC4 Titanium Alloy Sheet with Smelting by Sponge Titanium/Electrolytic Titanium[J]. Special Casting & Nonferrous Alloys, 2020,40(1):104-107.
[1]谭聪,余堃,肖寒,张宏宇,黄海广,李志敏,刘昆,周荣锋.海绵钛/电解钛熔炼TC4钛合金铸锭直接轧制板材的组织及性能[J].特种铸造及有色合金,2020,40(01):104-107. DOI： 10.15980/j.tzzz.2020.01.025.

Tan Cong, Yu Kun, Xiao Han, et al. Microstructure and Properties of Rolled TC4 Titanium Alloy Sheet with Smelting by Sponge Titanium/Electrolytic Titanium[J]. Special Casting & Nonferrous Alloys, 2020,40(1):104-107. DOI： 10.15980/j.tzzz.2020.01.025.

摘要

分别以海绵钛和电解钛为原材料熔炼TC4钛合金

将熔炼后的铸锭进行热轧

研究两种原材料熔炼的铸锭轧制为TC4轧板后的组织与性能。结果表明

海绵钛TC4热轧板材组织较电解钛晶粒粗大

组织不均匀

而电解钛TC4热轧板材组织为均匀细长、条状交错的α相

呈现出类似网篮组织结构。海绵钛TC4板材的抗拉强度和洛氏硬度明显高于电解钛TC4钛合金板材

而电解钛TC4板材的塑性更好。海绵钛TC4板材的断裂方式为准解理断裂与韧性断裂的复合断裂

而电解钛TC4板材的断裂方式为韧性断裂。

Abstract

Titanium sponge and electrolytic titanium were used as raw materials for smelting TC4 titanium alloy

respectively.The smelted ingot was hot rolled to investigate the microstructure and mechanical properties of the TC4 rolled sheet smelted by the two raw materials.The results show that the non-uniform microstructure of the sponge titanium TC4 alloy after hot rolling presents more coarse than that of the electrolytic titanium.After the electrolytic titanium TC4 was rolled

it presents a more uniform slender interlacedαphase

which exhibits a similar basket structure.The tensile strength and Rockwell hardness of the sponge titanium TC4 titanium alloy sheet are greatly higher than those of the electrolytic titanium TC4 titanium alloy sheet

however the plasticity of the electrolytic titanium TC4 sheet is the better.The fracture mode of titanium sponge TC4 titanium alloy sheet is characterized by the compound fracture of quasi-cleavage fracture and ductile fracture

while the fracture mode of electrolytic titanium TC4 is characterized by ductile fracture.