基于仿真与3D打印砂型的复杂铝合金壳体制造

增材铸造 | 浏览量 : 0 下载量: 165 CSCD: 6

基于仿真与3D打印砂型的复杂铝合金壳体制造
Manufacturing of Integrated Complex Aluminium Shell Based on Simulation and 3D Printed Sand Mold
2019年39卷第11期页码：1192-1194
纸质出版日期： 2019 ，
DOI： 10.15980/j.tzzz.2019.11.009

扫描看全文

[1]洪润洲,周永江,左强,范学燚,张喆,王万成.基于仿真与3D打印砂型的复杂铝合金壳体制造[J].特种铸造及有色合金,2019,39(11):1192-1194.

Hong Runzhou, Zhou Yongjiang, Zuo Qiang, et al. Manufacturing of Integrated Complex Aluminium Shell Based on Simulation and 3D Printed Sand Mold[J]. Special Casting & Nonferrous Alloys, 2019,39(11):1192-1194.
[1]洪润洲,周永江,左强,范学燚,张喆,王万成.基于仿真与3D打印砂型的复杂铝合金壳体制造[J].特种铸造及有色合金,2019,39(11):1192-1194. DOI： 10.15980/j.tzzz.2019.11.009.

Hong Runzhou, Zhou Yongjiang, Zuo Qiang, et al. Manufacturing of Integrated Complex Aluminium Shell Based on Simulation and 3D Printed Sand Mold[J]. Special Casting & Nonferrous Alloys, 2019,39(11):1192-1194. DOI： 10.15980/j.tzzz.2019.11.009.

通过工艺仿真

优化铝合金复杂壳体的浇注系统和冷铁设置。根据仿真优化结果

在3D打印砂型中相应的位置设置冷铁

通过设置合理的砂型配合间隙

表面涂刷涂料和低压浇注

生产出满足技术要求的复杂壳体铸件。

According to the simulated result of casting process of the integrated complex aluminium shell

chills were set in perticular positions in the 3D print sand mold.Appropriate fit tolerance was set between sand mold and sand cores

and the surface of sands mold and sand cores was coated and low pressure casting process was applied

so the aluminium shell was manufactured and it′s properties meet the technical requirements.

3D打印砂型工艺仿真复杂铝合金铸件

3D Prtinted Sand MoldCasting Process SimulationIntegrated Aluminium Casting

文章被引用时，请邮件提醒。

提交

暂无数据