熔模铸造冷铁激冷工艺研究

刘焕文; 陈素明; 惠西胜; 郭巧玲

doi:10.15980/j.tzzz.2019.10.017

精密铸造 | 浏览量 : 0 下载量: 90 CSCD: 1

导出
分享
收藏
专辑

熔模铸造冷铁激冷工艺研究
Chilling Process of Investment Casting with Cold Iron
2019年39卷第10期页码：1104-1105
纸质出版日期： 2019 ，
DOI： 10.15980/j.tzzz.2019.10.017

扫描看全文

[1]刘焕文,陈素明,惠西胜,郭巧玲.熔模铸造冷铁激冷工艺研究[J].特种铸造及有色合金,2019,39(10):1104-1105.

Liu Huanwen, Chen Suming, Hui Xisheng, et al. Chilling Process of Investment Casting with Cold Iron[J]. Special Casting & Nonferrous Alloys, 2019,39(10):1104-1105.
[1]刘焕文,陈素明,惠西胜,郭巧玲.熔模铸造冷铁激冷工艺研究[J].特种铸造及有色合金,2019,39(10):1104-1105. DOI： 10.15980/j.tzzz.2019.10.017.

Liu Huanwen, Chen Suming, Hui Xisheng, et al. Chilling Process of Investment Casting with Cold Iron[J]. Special Casting & Nonferrous Alloys, 2019,39(10):1104-1105. DOI： 10.15980/j.tzzz.2019.10.017.

摘要

分析了熔模铸造缩孔、缩松及偏析产生的原因。通过试验研究

提出了两种熔模铸造冷铁激冷工艺解决方案。结果表明

通过"工"柱形冷铁或镶嵌式块状激冷工艺对铸件厚大部位进行冷却

铸件在浇注及凝固过程中能实现快速凝固

避免了铸件缩孔、缩松及偏析缺陷的出现

提高了工艺出品率。

Abstract

The origination of dispersed shrinkage porosities（holes）as well as segregation in investment castings was analyzed.Through experiment analysis

two solutions of investment casting chilling process were put forward.The results show that the thicker areas of the casting can be cooled by the"I-beams"column block chill or inlaying block quenching process

and the castings can be rapidly solidified

thus avoiding shrinkage porosities（holes）and segregation defects

improving the production yield.