基于数值模拟的压铸锌合金化油器壳工艺研究

王成玥; 胡清和; 邓敏杰; 黄勇

doi:10.15980/j.tzzz.2019.08.010

计算机应用技术 | 浏览量 : 0 下载量: 70 CSCD: 0

导出
分享
收藏
专辑

基于数值模拟的压铸锌合金化油器壳工艺研究
Die Casting Process Optimization of Zinc Alloy Carburetor Housing Based on Numerical Simulation
2019年39卷第8期页码：850-854
纸质出版日期： 2019 ，
DOI： 10.15980/j.tzzz.2019.08.010

扫描看全文

[1]王成玥,胡清和,邓敏杰,黄勇.基于数值模拟的压铸锌合金化油器壳工艺研究[J].特种铸造及有色合金,2019,39(08):850-854.

Wang Chengyue, Hu Qinghe, Deng Minjie, et al. Die Casting Process Optimization of Zinc Alloy Carburetor Housing Based on Numerical Simulation[J]. Special Casting & Nonferrous Alloys, 2019,39(8):850-854.
[1]王成玥,胡清和,邓敏杰,黄勇.基于数值模拟的压铸锌合金化油器壳工艺研究[J].特种铸造及有色合金,2019,39(08):850-854. DOI： 10.15980/j.tzzz.2019.08.010.

Wang Chengyue, Hu Qinghe, Deng Minjie, et al. Die Casting Process Optimization of Zinc Alloy Carburetor Housing Based on Numerical Simulation[J]. Special Casting & Nonferrous Alloys, 2019,39(8):850-854. DOI： 10.15980/j.tzzz.2019.08.010.

摘要

根据锌合金压铸件化油器壳的结构特点

设计正交试验

并在ProCAST软件中进行压铸工艺数值模拟。模拟优化出的压铸工艺参数:浇注温度为435℃

压射速度为2.39m/s

模具温度为220℃。对比模拟结果和实际生产可知

优化后的压铸工艺减少了压铸件上的缩孔、缩松量和卷气量

使压铸件品质得到了提高。

Abstract

According to the structure characteristics of the die-casting carburetor housing

orthogonal experiments were designed and the die casting process was simulated by ProCAST software.The die casting process parameters were optimized as follows:pouring temperature of 435 ℃

injection speed of 2.39 m/s and mould temperature of 220℃.Comparing the simulation results with the actual production experiments

it can be concluded that the optimized die casting process can reduce the shrinkage

porosity and air entrapment in the die-castings

improving the quality of the die-castings.