北美地区双腔节流阀体压铸不良品分析及对策

李珊; 王磊; 黄志华

doi:10.15980/j.tzzz.2019.06.012

English Version

压力铸造 | 浏览量 : 15 下载量: 33 CSCD: 0

导出
分享给微信好友或者朋友圈

分享
收藏
专辑

北美地区双腔节流阀体压铸不良品分析及对策
Die-casting Defects Analysis and Countermeasures of North America Double-cavity Throttle Body
- 角色： First author 第一作者
- 机构：
  岭南师范学院机电工程学院
李珊
1 ，
- 角色： Corresponding author 通讯作者
- 机构：
  岭南师范学院机电工程学院
- 邮箱： wanglei1999-1999@163.com
王磊
1 ，
- 机构：
  湛江德利车辆部件有限公司
黄志华
2
2019年39卷第6期页码：627-630
纸质出版日期： 2019 ，
DOI： 10.15980/j.tzzz.2019.06.012

扫描看全文

引用
[1]李珊,王磊,黄志华.北美地区双腔节流阀体压铸不良品分析及对策[J].特种铸造及有色合金,2019,39(06):627-630.

Li Shan, Wang Lei, Huang Zhihua. Die-casting Defects Analysis and Countermeasures of North America Double-cavity Throttle Body[J]. Special Casting & Nonferrous Alloys, 2019,39(6):627-630.
[1]李珊,王磊,黄志华.北美地区双腔节流阀体压铸不良品分析及对策[J].特种铸造及有色合金,2019,39(06):627-630. DOI： 10.15980/j.tzzz.2019.06.012.

Li Shan, Wang Lei, Huang Zhihua. Die-casting Defects Analysis and Countermeasures of North America Double-cavity Throttle Body[J]. Special Casting & Nonferrous Alloys, 2019,39(6):627-630. DOI： 10.15980/j.tzzz.2019.06.012.

摘要

介绍了北美地区双腔节流阀体的产品结构、模具结构以及压铸生产过程中出现的主要缺陷。运用压铸填充的P-Q²关系对浇注系统设计进行了验证,利用模流分析软件对溢流排气系统进行了分析,并针对性地采取了措施,有效地降低了压铸件废品率。

译

Abstract

The product structure,die-casting mold structure and main defects in the double cavity throttle valve body were analyzed.The design of the gating system was verified by using the P-Q² formula of die-casting system,and the overflow exhaust system was analyzed by using the mold flow analysis software.Some measures were taken to reduce effectively the reject rate of the product.

译

关键词

压铸模; 浇注系统; P-Q2关系; 溢流排气系统; 模流分析

译

Keywords

Die-Casting Mold; Feeding System; P-Q2 Formula; Exhausting System; Mold Flow Analysis

译

摘要

介绍了北美地区双腔节流阀体的产品结构、模具结构以及压铸生产过程中出现的主要缺陷。运用压铸填充的P-Q

关系对浇注系统设计进行了验证

利用模流分析软件对溢流排气系统进行了分析

并针对性地采取了措施

有效地降低了压铸件废品率。

Abstract

The product structure

die-casting mold structure and main defects in the double cavity throttle valve body were analyzed.The design of the gating system was verified by using the P-Q

formula of die-casting system

and the overflow exhaust system was analyzed by using the mold flow analysis software.Some measures were taken to reduce effectively the reject rate of the product.