铝合金机壳低压铸造型芯感应加热研究及应用

韩伟; 刘楚生; 陈晓斌; 潘健怡

doi:10.15980/j.tzzz.2019.05.029

轻有色合金 | 浏览量 : 0 下载量: 82 CSCD: 2

导出
分享
收藏
专辑

铝合金机壳低压铸造型芯感应加热研究及应用
Research and Application of Induction Heating for Low Pressure Casting Core of Aluminum Alloy Housing
2019年39卷第5期页码：568-572
纸质出版日期： 2019 ，
DOI： 10.15980/j.tzzz.2019.05.029

扫描看全文

[1]韩伟,刘楚生,陈晓斌,潘健怡.铝合金机壳低压铸造型芯感应加热研究及应用[J].特种铸造及有色合金,2019,39(05):568-572.

Han Wei, Liu Chusheng, Chen Xiaobin, et al. Research and Application of Induction Heating for Low Pressure Casting Core of Aluminum Alloy Housing[J]. Special Casting & Nonferrous Alloys, 2019,39(5):568-572.
[1]韩伟,刘楚生,陈晓斌,潘健怡.铝合金机壳低压铸造型芯感应加热研究及应用[J].特种铸造及有色合金,2019,39(05):568-572. DOI： 10.15980/j.tzzz.2019.05.029.

Han Wei, Liu Chusheng, Chen Xiaobin, et al. Research and Application of Induction Heating for Low Pressure Casting Core of Aluminum Alloy Housing[J]. Special Casting & Nonferrous Alloys, 2019,39(5):568-572. DOI： 10.15980/j.tzzz.2019.05.029.

摘要

基于电磁感应加热能实现不直接接触即可以进行快速加热的特点

研究用感应线圈将电动汽车铝合金机壳圆柱型芯快速加热到预热温度的方法

以增强低压铸造铝合金液的充型流动性

预防铸件结晶凝固过程中缩孔等缺陷产生。通过计算

确定感应线圈加热参数及匝数

并运用ANSYS软件对电磁加热型芯的过程进行有限元温度场分析

为温度控制及感应加热提供精确的工艺参数

也为选择合理的低压铸造型芯加热工艺方案提供技术参考。

Abstract

According to the characteristics of electromagnetic induction heating

the coil can be heated quickly without contacting with the material.Based on the above mentioned features

a method on how to rapidly heat the cylindrical core of aluminum alloy housings for electric vehicle was put forward to preheating temperature by electromagnetic induction coil.This method can enhance the filling fluidity of the low pressure casting aluminum alloy

and prevent defects such as shrinkage cavities in the solidification process.The heating parameters and turns of induction coil were determined by calculation

and the finite element temperature field analysis was carried out to analyze the process of the electromagnetic heating core by using ANSYS software

so as to provide accurate technological parameters for temperature control and induction heating and technical basis for selecting reasonable heating process for low pressure casting core.