外加压应力对Ti-1300合金组织和性能的影响

朱红; 张珍宣

doi:10.15980/j.tzzz.2019.03.025

轻有色合金 | 浏览量 : 0 下载量: 29 CSCD: 0

导出
分享
收藏
专辑

外加压应力对Ti-1300合金组织和性能的影响
Effects of External Compressive Stress on Microstructure and Properties of Ti-1300 Alloy
2019年39卷第3期页码：331-334
纸质出版日期： 2019 ，
DOI： 10.15980/j.tzzz.2019.03.025

扫描看全文

[1]朱红,张珍宣.外加压应力对Ti-1300合金组织和性能的影响[J].特种铸造及有色合金,2019,39(03):331-334.

Zhu Hong, Zhang Zhenxuan. Effects of External Compressive Stress on Microstructure and Properties of Ti-1300 Alloy[J]. Special Casting & Nonferrous Alloys, 2019,39(3):331-334.
[1]朱红,张珍宣.外加压应力对Ti-1300合金组织和性能的影响[J].特种铸造及有色合金,2019,39(03):331-334. DOI： 10.15980/j.tzzz.2019.03.025.

Zhu Hong, Zhang Zhenxuan. Effects of External Compressive Stress on Microstructure and Properties of Ti-1300 Alloy[J]. Special Casting & Nonferrous Alloys, 2019,39(3):331-334. DOI： 10.15980/j.tzzz.2019.03.025.

摘要

研究了外加压应力作用下Ti-1300合金在等温时效和连续冷却过程中的组织演化和性能。结果表明

外加压应力对Ti-1300合金时效过程和连续冷却过程中β→α相变都有促进作用

随着压应力的增加

析出α相的数量越多且α相的厚度越小

表现出一定的择优取向效应。同时

Ti-1300合金的显微硬度也随着外加应力的增大而增大。

Abstract

The microstructural evolution and properties of Ti-1300 alloy under external compressive stress during isothermal aging and continuous cooling were investigated.The results reveal that the external pressure stress promotes theβ→αphase transformation during isothermal aging and continuous cooling of Ti-1300 alloy.With the increase of compressive stress

the volume fraction ofαphase is increased and the thickness ofαphase is decreased

showing the preferred orientation effect.Moreover

the microhardness of Ti-1300 alloy is increased with the increase of external compressive stress.