整体叶轮的逆向数据采集和模型重建

白瑀; 张浩; 黄亮; 蒋葳

doi:10.15980/j.tzzz.2019.03.015

精密铸造 | 浏览量 : 0 下载量: 121 CSCD: 1

导出
分享
收藏
专辑

整体叶轮的逆向数据采集和模型重建
Reverse Data Acquisition and Model Reconstruction of Integral Impeller
2019年39卷第3期页码：293-297
纸质出版日期： 2019 ，
DOI： 10.15980/j.tzzz.2019.03.015

扫描看全文

[1]白瑀,张浩,黄亮,蒋葳.整体叶轮的逆向数据采集和模型重建[J].特种铸造及有色合金,2019,39(03):293-297.

Bai Yu, Zhang Hao, Huang Liang, et al. Reverse Data Acquisition and Model Reconstruction of Integral Impeller[J]. Special Casting & Nonferrous Alloys, 2019,39(3):293-297.
[1]白瑀,张浩,黄亮,蒋葳.整体叶轮的逆向数据采集和模型重建[J].特种铸造及有色合金,2019,39(03):293-297. DOI： 10.15980/j.tzzz.2019.03.015.

Bai Yu, Zhang Hao, Huang Liang, et al. Reverse Data Acquisition and Model Reconstruction of Integral Impeller[J]. Special Casting & Nonferrous Alloys, 2019,39(3):293-297. DOI： 10.15980/j.tzzz.2019.03.015.

摘要

研究利用逆向工程技术来实现某整体式叶轮模型的重建。通过XTOM教育型面扫描系统对整体式叶轮模型点云数据进行采集

并基于Imageware数据处理软件对叶轮点云数据进行处理

结合旋转法和截面放样法对轮毂和叶片曲面进行创建

在误差控制条件下最终实现叶轮模型精确重建。

Abstract

Reverse engineering technology was used to reconstruct an integral impeller model.In particular

the point cloud data of the integral impeller model was collected through the XTOM educational surface scanning system

and the point cloud data of the impeller model was processed based on Imageware data processing software.The wheel hub and blade surface were created by combining the rotation method with the section lofting method

and the accurate reconstruction of the impeller model was finally realized under the condition of error control.

关键词

整体式叶轮逆向数据模型重构

Keywords

Integral ImpellerReverse DataModel Reconstruction

references

文章被引用时，请邮件提醒。

提交

暂无数据