大型铝合金框架的热处理变形控制

秦守益; 余国康; 何凯; 范李鹏; 崔元杰; 王宝兵; 孙敏杰; 王林; 梁海迪

doi:10.15980/j.tzzz.2019.02.025

轻有色合金 | 浏览量 : 0 下载量: 94 CSCD: 1

导出
分享
收藏
专辑

大型铝合金框架的热处理变形控制
Heat Treatment Deformation Control of Large Aluminum Alloy Frame
2019年39卷第2期页码：210-212
纸质出版日期： 2019 ，
DOI： 10.15980/j.tzzz.2019.02.025

扫描看全文

[1]秦守益,余国康,何凯,范李鹏,崔元杰,王宝兵,孙敏杰,王林,梁海迪.大型铝合金框架的热处理变形控制[J].特种铸造及有色合金,2019,39(02):210-212.

Qin Shouyi, Yu Guokang, He Kai, et al. Heat Treatment Deformation Control of Large Aluminum Alloy Frame[J]. Special Casting & Nonferrous Alloys, 2019,39(2):210-212.
[1]秦守益,余国康,何凯,范李鹏,崔元杰,王宝兵,孙敏杰,王林,梁海迪.大型铝合金框架的热处理变形控制[J].特种铸造及有色合金,2019,39(02):210-212. DOI： 10.15980/j.tzzz.2019.02.025.

Qin Shouyi, Yu Guokang, He Kai, et al. Heat Treatment Deformation Control of Large Aluminum Alloy Frame[J]. Special Casting & Nonferrous Alloys, 2019,39(2):210-212. DOI： 10.15980/j.tzzz.2019.02.025.

摘要

以大型铝合金框架为研究对象

研究了其热处理过程中的尺寸变形问题。结果表明

对于框架结构铸件

采用焊接拉筋的方法不能完全避免热处理变形问题

淬火后仍然存在变形

最大变形量为12.4mm。固溶处理后

采用人工矫正和机械矫正结合的方法对框架结构铸件进行矫正

能有效地将变形尺寸控制在有效范围内

满足设计要求。将框架铸件增加加强筋

浇注时整体成形

铸件最大变形量为2～5mm

取到了良好的效果。

Abstract

The dimensional deformation of large aluminum alloy frame during heat treatment was investigated.The experimental results reveal that the heat treatment deformation cann’t be completely eliminated by welding tendons.After quenching

there still exists deformation and the maximum deformation is 12.4 mm.After solid solution treatment

the frame structure castings are corrected by combining artificial with mechanical correction which can control effectively the deformation size within the effective range and meet the design requirements.The frame castings were added with reinforcing ribs and formed as a whole.The maximum deformation is 2～5 mm

obtaining the satisfied effects.