铝合金组合壳体铸件的金属型铸造工艺优化

赵而团; 田玉晶; 孙世臣; 王彦启

doi:10.15980/j.tzzz.2018.12.010

计算机应用技术 | 浏览量 : 0 下载量: 259 CSCD: 0

导出
分享
收藏
专辑

铝合金组合壳体铸件的金属型铸造工艺优化
Optimization of Permanent Casting Process for Aluminum Alloy Combined Shell
2018年38卷第12期页码：1317-1320
纸质出版日期： 2018 ，
DOI： 10.15980/j.tzzz.2018.12.010

扫描看全文

[1]赵而团,田玉晶,孙世臣,王彦启.铝合金组合壳体铸件的金属型铸造工艺优化[J].特种铸造及有色合金,2018,38(12):1317-1320.

Zhao Ertuan, Tian Yujing, Sun Shichen, et al. Optimization of Permanent Casting Process for Aluminum Alloy Combined Shell[J]. Special Casting & Nonferrous Alloys, 2018,38(12):1317-1320.
[1]赵而团,田玉晶,孙世臣,王彦启.铝合金组合壳体铸件的金属型铸造工艺优化[J].特种铸造及有色合金,2018,38(12):1317-1320. DOI： 10.15980/j.tzzz.2018.12.010.

Zhao Ertuan, Tian Yujing, Sun Shichen, et al. Optimization of Permanent Casting Process for Aluminum Alloy Combined Shell[J]. Special Casting & Nonferrous Alloys, 2018,38(12):1317-1320. DOI： 10.15980/j.tzzz.2018.12.010.

摘要

通过分析铝合金组合壳体铸件的结构特点

利用铸造模拟软件对不同的铸造工艺方案进行了模拟分析。根据凝固温度场分布和基于残余熔体模数法的概率缺陷分布对工艺方案进行优化改进

从而得到最佳工艺方案。经实际生产验证

产品一次试制成功

有效缩短了开发周期。

Abstract

The structural characteristics of the aluminum alloy combined shell castings were analyzed

and the different casting process schemes were simulated with the help of casting simulation software.According to the distribution of solidification temperature field and the probability defect distribution based on the residual melt modulus method

the optimal casting process scheme was carried out.The actual production indicates that the trial production of the product is successful

and the development cycle is shortened effectively.