型腔压力对通讯腔体压铸充型行为的影响

尹之华; 黄毅; 陈振明; 付加攀; 赵海东

doi:10.15980/j.tzzz.2018.10.011

压力铸造 | 浏览量 : 0 下载量: 93 CSCD: 1

导出
分享
收藏
专辑

型腔压力对通讯腔体压铸充型行为的影响
Effects of Initial Cavity Gas Pressure on Filling Behavior of Filter-cavity Castings
2018年38卷第10期页码：1082-1085
纸质出版日期： 2018 ，
DOI： 10.15980/j.tzzz.2018.10.011

扫描看全文

[1]尹之华,黄毅,陈振明,付加攀,赵海东.型腔压力对通讯腔体压铸充型行为的影响[J].特种铸造及有色合金,2018,38(10):1082-1085.

Yin Zhihua, Huang Yi, Chen Zhenming, et al. Effects of Initial Cavity Gas Pressure on Filling Behavior of Filter-cavity Castings[J]. Special Casting & Nonferrous Alloys, 2018,38(10):1082-1085.
[1]尹之华,黄毅,陈振明,付加攀,赵海东.型腔压力对通讯腔体压铸充型行为的影响[J].特种铸造及有色合金,2018,38(10):1082-1085. DOI： 10.15980/j.tzzz.2018.10.011.

Yin Zhihua, Huang Yi, Chen Zhenming, et al. Effects of Initial Cavity Gas Pressure on Filling Behavior of Filter-cavity Castings[J]. Special Casting & Nonferrous Alloys, 2018,38(10):1082-1085. DOI： 10.15980/j.tzzz.2018.10.011.

摘要

以AlSi12Fe铝合金通讯腔体为对象

通过成形试验及数值模拟

研究了初始型腔压力对真空压铸充型过程的影响。结果表明

随着抽真空时间的延长和初始型腔压力的下降

铸件散热齿部位的成形困难增大。

Abstract

Based on the AlSi12 Fe filter-cavity castings

through analysis of the forming test and the numerical simulation

effects of the initial cavity gas pressure on mold filling during the vacuum die casting process were investigated.The results reveal that it is more difficult to form the castings with the decrease of the initial cavity gas pressure and increasing in drawing vacuum time.