汽车用铝合金壳体压铸件温度场模拟与优化

熊博文; 张欣源; 陈天禄

doi:10.15980/j.tzzz.2018.06.012

压力铸造 | 浏览量 : 0 下载量: 144 CSCD: 0

导出
分享
收藏
专辑

汽车用铝合金壳体压铸件温度场模拟与优化
Numerical Simulation and Optimization Design of Die Casting Process for Al Alloy Automobile Housing
2018年38卷第6期页码：622-625
纸质出版日期： 2018 ，
DOI： 10.15980/j.tzzz.2018.06.012

扫描看全文

[1]熊博文,张欣源,陈天禄.汽车用铝合金壳体压铸件温度场模拟与优化[J].特种铸造及有色合金,2018,38(06):622-625.

Xiong Bowen, Zhang Xinyuan, Chen Tianlu. Numerical Simulation and Optimization Design of Die Casting Process for Al Alloy Automobile Housing[J]. Special Casting & Nonferrous Alloys, 2018,38(6):622-625.
[1]熊博文,张欣源,陈天禄.汽车用铝合金壳体压铸件温度场模拟与优化[J].特种铸造及有色合金,2018,38(06):622-625. DOI： 10.15980/j.tzzz.2018.06.012.

Xiong Bowen, Zhang Xinyuan, Chen Tianlu. Numerical Simulation and Optimization Design of Die Casting Process for Al Alloy Automobile Housing[J]. Special Casting & Nonferrous Alloys, 2018,38(6):622-625. DOI： 10.15980/j.tzzz.2018.06.012.

摘要

针对铝合金壳体压铸件生产存在的问题

采用ProCAST软件对该铸件压铸过程进行了数值模拟

分析了铸件温度场并预测了铸件易出现缩孔、缩松的位置

提出了两种强制水冷的方案来优化铸件温度场。采用数值模拟对比分析了两种优化方案的温度场

获得了最优的压铸方案。解剖优化方案试生产的铸件

发现其内部品质良好

缩孔、缩松完全消除。

Abstract

For solving the problems existing in Al alloy housing

the die casting process was simulated using ProCAST software.The temperature field of Al alloy was analyzed and the position of shrinkage cavities and porosity was predicted.Two kinds of schemes for optimizing casting temperature field by cooling water were put forward.The temperatures field of two kinds of schemes was analyzed comparatively for obtaining the optimized scheme.The internal shrinkage cavities and porosity in housing fabricated by the optimized scheme were eliminated completely with the optimized scheme.