高强铝合金流变成形的研究现状与展望

郭洪民; 刘斌; 杨湘杰

doi:10.15980/j.tzzz.2018.06.009

综述 | 浏览量 : 0 下载量: 266 CSCD: 1

导出
分享
收藏
专辑

高强铝合金流变成形的研究现状与展望
Development Status and Prospect of High Strength Aluminum Alloys in Rheoforming
2018年38卷第6期页码：612-615
纸质出版日期： 2018 ，
DOI： 10.15980/j.tzzz.2018.06.009

扫描看全文

[1]郭洪民,刘斌,杨湘杰.高强铝合金流变成形的研究现状与展望[J].特种铸造及有色合金,2018,38(06):612-615.

Guo Hongmin, Liu Bin, Yang Xiangjie. Development Status and Prospect of High Strength Aluminum Alloys in Rheoforming[J]. Special Casting & Nonferrous Alloys, 2018,38(6):612-615.
[1]郭洪民,刘斌,杨湘杰.高强铝合金流变成形的研究现状与展望[J].特种铸造及有色合金,2018,38(06):612-615. DOI： 10.15980/j.tzzz.2018.06.009.

Guo Hongmin, Liu Bin, Yang Xiangjie. Development Status and Prospect of High Strength Aluminum Alloys in Rheoforming[J]. Special Casting & Nonferrous Alloys, 2018,38(6):612-615. DOI： 10.15980/j.tzzz.2018.06.009.

摘要

高强铝合金是流变成形实现"以铸代锻"的关键材料

流变成形是高强铝合金实现复杂结构件近净成形的有效途径。高强铝合金流变成形存在2个主要矛盾:一是成形件的强度和塑性之间的矛盾;二是合金的成形工艺性能与热处理强化能力之间的矛盾。从半固态浆料制备、专用合金成分设计以及特征微结构调控等三方面探讨了高强铝合金流变成形存在的关键问题。

Abstract

High strength aluminum alloys are key materials for rheoforming to realize"replacing forging by casting".Rheoforming is an available processing technology for high strength aluminum alloys to produce complex shape components.However

high strength aluminum alloys used in rheoforming are standard alloys.For these alloys

there are high contradictions between rheoformability and potential of heat treatment

and between strength and ductility of rheoformed components.The present review introduced and discussed three key scientific problems including semi-solid slurry preparation

alloy design and characteristic microstructures controlling.