低压铸造A356铝合金轮毂热处理温度研究

李玉升

doi:10.15980/j.tzzz.2018.05.015

English Version

压力铸造 | 浏览量 : 22 下载量: 311 CSCD: 3

导出
分享给微信好友或者朋友圈

分享
收藏
专辑

低压铸造A356铝合金轮毂热处理温度研究
Effects of Heat Treatment Temperature on Performance of A356 Aluminum Alloy Wheel
- 角色： First author 第一作者
- 机构：
  滨州盟威戴卡轮毂有限公司
李玉升
1
2018年38卷第5期页码：516-517
纸质出版日期： 2018 ，
DOI： 10.15980/j.tzzz.2018.05.015

扫描看全文

引用
[1]李玉升.低压铸造A356铝合金轮毂热处理温度研究[J].特种铸造及有色合金,2018,38(05):516-517.

Li Yusheng. Effects of Heat Treatment Temperature on Performance of A356 Aluminum Alloy Wheel[J]. Special Casting & Nonferrous Alloys, 2018,38(5):516-517.
[1]李玉升.低压铸造A356铝合金轮毂热处理温度研究[J].特种铸造及有色合金,2018,38(05):516-517. DOI： 10.15980/j.tzzz.2018.05.015.

Li Yusheng. Effects of Heat Treatment Temperature on Performance of A356 Aluminum Alloy Wheel[J]. Special Casting & Nonferrous Alloys, 2018,38(5):516-517. DOI： 10.15980/j.tzzz.2018.05.015.

摘要

采用低压铸造A356铝合金轮毂进行试验,在固溶时间和时效时间不变的条件下,对同一批次的轮毂毛坯进行不同固溶温度和时效温度的分析。结果表明,轮毂在555℃固溶温度下进行连续热处理将产生过烧,在545℃固溶+150℃时效和550℃固溶+150℃时效下得到的铸件性能较好。

译

Abstract

At a given solid solution time and aging time,effects of different solid solution temperature and aging temperature on performance of A356 low pressure cast aluminum alloy wheels were investigated.The results reveal that at solid solution temperature of 555℃,aging treatment can lead to the over burning of alloy wheel.At 545 ℃ solid solution and 150 ℃ aging or at 550 ℃ solid solution and 150 ℃aging,A356 alloy wheel exhibits the desirable performace.

译

关键词

A356铝合金轮毂; 固溶; 时效

译

Keywords

A356 Alloy Wheels; Solution; Aging

译

摘要

采用低压铸造A356铝合金轮毂进行试验

在固溶时间和时效时间不变的条件下

对同一批次的轮毂毛坯进行不同固溶温度和时效温度的分析。结果表明

轮毂在555℃固溶温度下进行连续热处理将产生过烧

在545℃固溶+150℃时效和550℃固溶+150℃时效下得到的铸件性能较好。

Abstract

At a given solid solution time and aging time

effects of different solid solution temperature and aging temperature on performance of A356 low pressure cast aluminum alloy wheels were investigated.The results reveal that at solid solution temperature of 555℃

aging treatment can lead to the over burning of alloy wheel.At 545 ℃ solid solution and 150 ℃ aging or at 550 ℃ solid solution and 150 ℃aging

A356 alloy wheel exhibits the desirable performace.